Precipitation Hardening in Al-Cu-Mg Alloys: Analysis of Precipitates, Modelling of Kinetics, Strength Predictions
Authors:
- 15 July 2006
- journal article
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 519-521, 251-258
Abstract
In Al-Cu-Mg with compositions in the α+S phase field, precipitation hardening is a twostage process. Experimental evidence shows that the main precipitation sequence in alloys with Cu contents in excess of 1wt% is involves Cu-Mg co-clusters, GPBII/S'' and S. The first stage of the age hardening is due to the formation of Cu-Mg co-clusters, and the hardening can be modelled well by a modulus hardening mechanism. The appearance of the orthorhombic GPBII/S'' does not influence the hardness. The second stage of the hardening is due to the precipitation of S phase, which strengthens the alloy predominantly through the Orowan looping mechanism. These findings are incorporated into a multi-phase, multi mechanism model for yield strength of Al-Cu-Mg based alloys. The model is applied to a range of alloys with Cu:Mg ratios between 0.1 and 1 and to heat treatments ranging from room temperature ageing and artificial isothermal ageing to rapid heating to the solution treatment temperature. The predictive capabilities of this model are reviewed and its constitutive components are compared and contrasted with a range of other methods, such as the Kampmann-Wagner and JMAK models for precipitation as well as the LSW model for coarsening.Keywords
This publication has 16 references indexed in Scilit:
- Precipitation hardening in Al–Cu–Mg alloys revisitedScripta Materialia, 2006
- Precipitates and intermetallic phases in precipitation hardening Al–Cu–Mg–(Li) based alloysInternational Materials Reviews, 2005
- Room temperature precipitation in quenched Al–Cu–Mg alloys: a model for the reaction kinetics and yield strength developmentPhilosophical Magazine, 2005
- The assessment of GPB2/S′′ structures in Al–Cu–Mg alloysMaterials Science and Engineering: A, 2004
- Analysis of aluminium based alloys by calorimetry: quantitative analysis of reactions and reaction kineticsInternational Materials Reviews, 2004
- A HRTEM study of metastable phase formation in Al–Mg–Cu alloys during artificial agingActa Materialia, 2004
- A model for the yield strength of overaged Al–Zn–Mg–Cu alloysActa Materialia, 2003
- On the meaning of the impingement parameter in kinetic equations for nucleation and growth reactionsJournal of Materials Science, 2001
- Coexistence of clusters, GPB zones, S″-, S′- and S-phases in an Al–0.9% Cu–1.4% Mg alloyActa Materialia, 2000
- Analysis of Precipitation in Al-Based Alloys Using a Novel Model for Nucleation and Growth ReactionsJournal of Thermal Analysis and Calorimetry, 1998