Research on the Four-Component Borehole Strain Response to Rock Fracture
Open Access
Abstract
Rock fracture monitoring is crucial for the stability of rock engineering. Based on the four-component borehole strain (FCBS) theory, this study analyzes the response characteristics of FCBS through numerical simulations of large-scale local rock fracture. Drawing on linear elastic mechanics theory and combined with the Gaussian white noise model, three strain response indices (areal strain index and shear strain indices , ) are proposed to quantitatively characterize rock fracture events. A criterion is defined that if any of these indices is greater than 1, the rock fracture event can be reflected, and the larger the index, the better the effect of this index in reflecting rock fracture. The effects of the installation angle of the four-component borehole strain gauge (FCBSG), the distance between the borehole and the fracture zone, and the orientation of the borehole on these three indices are systematically investigated. The results show that for the same borehole, the areal strain index remains constant for different installation angles of the FCBSG, while the two shear strain indices exhibit a complementary variation trend—one shear strain index is always greater than or equal to the characteristic value of the borehole shear strain index, and the other is less than or equal to it; the larger values of the areal strain index and shear strain index decrease with the increase in the distance between the borehole and the fracture zone, following the variation law of the function y = axb with a negative exponent; there are significant differences in the larger values of the areal strain index and shear strain index among different orientation of the borehole, while those in the same orientation of the borehole relative to the fault fractured zone show a certain degree of complementarity, and the combined use of shear strain indices and areal strain index can better reflect rock fracture events; within the range of orientation of the borehole β = 0° to β = 90°, the minimum range of rock fracture that can be reflected by the three strain response indices is 55 m, the maximum range is 65 m, and the average range is 60.7 m.
Keywords
Funding Information
- National Natural Science Foundation of China (52474106)
This publication has 19 references indexed in Scilit:
- Microcrack monitoring and fracture evolution of coal and rock using integrated acoustic emission and digital image correlation techniquesScientific Reports, 2024
- Characterizing Tensile Strength of Building Sandstone via Uniaxial Tensile, Compressive, and Flexural Bending TestsMaterials, 2023
- Experimental investigation on failure process and spatio-temporal evolution of rockburst in granite with a prefabricated circular holeJournal of Central South University, 2020
- Three-dimensional visualization and quantitative characterization of coal fracture dynamic evolution under uniaxial and triaxial compression based on μCT scanningFuel, 2020
- Characterization of pore-fracture networks and their evolution at various measurement scales in coal samples using X-ray μCT and a fractal methodInternational Journal of Coal Geology, 2018
- True-Triaxial Experimental Study of the Evolutionary Features of the Acoustic Emissions and Sounds of Rockburst ProcessesRock Mechanics and Rock Engineering, 2017
- Abnormal strain changes observed at Guza before the Wenchuan earthquakeScience China Earth Sciences, 2010
- Computer algorithm for analyzing and processing borehole strainmeter dataComputers & Geosciences, 2010
- Developments of borehole strain observation outside ChinaActa Seismologica Sinica, 2004
- Measurements of induced stress and strength in the near-field around a tunnel and associated estimation of the Mohr–Coulomb parameters for rock mass strengthInternational Journal of Rock Mechanics and Mining Sciences, 2004