Carbon fiber modified by attapulgite for preparing ultra‐high molecular weight polyethylene composite with enhanced thermal, mechanical, and tribological properties
Authors:
- 2 September 2022
- journal article
- research article
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 33 (12) , 4142-4151
Abstract
The attapulgite nanofibers (ATP) were grafted on the surface of carbon fibers (CF) by polyetherimide (PEI) with long chain to reinforce the thermal, mechanical properties, and fretting wear resistance of ultra‐high molecular weight polyethylene. The results showed that the surface roughness of CF modified by ATP nanofibers were highly increased. Meanwhile, the thermal, mechanical, and tribological properties of the ATP‐PEI‐CF/UPE composite were significantly improved, especially the enhancement in heat distortion temperature, compressive modulus, and wear resistance. The improvement mechanisms of the corresponding properties were mainly attributed to the increase of mechanical interlocking of the matrix and the hybrid fillers, which could not only transfer the load and heat applied to the matrix to the fibers, but also impede the friction damage of the matrix during fretting wear process.Keywords
This publication has 40 references indexed in Scilit:
- Interphase evaluation and nano-mechanical responses of UHMWPE/SCF/nano-SiO2 hybrid compositesPolymer Testing, 2014
- Chemically grafting carbon nanotubes onto carbon fibers by poly(acryloyl chloride) for enhancing interfacial strength in carbon fiber/unsaturated polyester compositesFibers and Polymers, 2014
- Polydopamine As an Efficient and Robust Platform to Functionalize Carbon Fiber for High-Performance Polymer CompositesACS Applied Materials & Interfaces, 2013
- Polyurethane grafted attapulgite as novel fillers for nylon 6 nanocompositesJournal of Wuhan University of Technology-Mater. Sci. Ed., 2011
- Thermal Stabilities of Attapulgite/Polystyrene (ATP/PS) Nanocomposites via Microwave‐Assisted Bulk PolymerizationJournal of Dispersion Science and Technology, 2008
- Recent Developments in Polymer Consolidated CompositesJournal of Reinforced Plastics and Composites, 2007
- Friction and wear properties of UHMWPE composites reinforced with carbon fiberMaterials Letters, 2005
- FW/M method for determination of the grain size distribution from powder diffraction line profileJournal of Alloys and Compounds, 2004
- Mechanical, surface and interfacial characterisation of pitch and PAN-based carbon fibresCarbon, 2000
- Conformational Flexibility of Poly(ethylenimine) and Its DerivativesBioorganic Chemistry, 1997