Step Timing Adjustment: A Step toward Generating Robust Gaits
Preprint
Abstract
Step adjustment for humanoid robots has been shown to improve robustness in gaits. However, step duration adaptation is often neglected in control strategies. In this paper, we propose an approach that combines both step location and timing adjustment for generating robust gaits. In this approach, step location and step timing are decided, based on feedback from the current state of the robot. The proposed approach is comprised of two stages. In the first stage, the nominal step location and step duration for the next step or a previewed number of steps are specified. In this stage which is done at the start of each step, the main goal is to specify the best step length and step duration for a desired walking speed. The second stage deals with finding the best landing point and landing time of the swing foot at each control cycle. In this stage, stability of the gaits is preserved by specifying a desired offset between the swing foot landing point and the Divergent Component of Motion (DCM) at the end of current step. After specifying the landing point of the swing foot at a desired time, the swing foot trajectory is regenerated at each control cycle to realize desired landing properties. Simulation on different scenarios shows the robustness of the generated gaits from our proposed approach compared to the case where no timing adjustment is employed.Keywords
All Related Versions
This publication has 10 references indexed in Scilit:
- Optimal gait planning for humanoids with 3D structure walking on slippery surfacesRobotica, 2015
- Momentum control with hierarchical inverse dynamics on a torque-controlled humanoidAutonomous Robots, 2015
- Three-Dimensional Bipedal Walking Control Based on Divergent Component of MotionIEEE Transactions on Robotics, 2015
- Capturability-based analysis and control of legged locomotion, Part 1: Theory and application to three simple gait modelsThe International Journal of Robotics Research, 2012
- Online Walking Motion Generation with Automatic Footstep PlacementAdvanced Robotics, 2010
- Real time motion generation and control for biped robot -1st report: Walking gait pattern generation-2009
- The ‘extrapolated center of mass’ concept suggests a simple control of balance in walkingHuman Movement Science, 2008
- AN ANALYTICAL METHOD FOR REAL-TIME GAIT PLANNING FOR HUMANOID ROBOTSInternational Journal of Humanoid Robotics, 2006
- Biped walking pattern generation by using preview control of zero-moment point2004
- A Simple Model of Bipedal Walking Predicts the Preferred Speed–Step Length RelationshipJournal of Biomechanical Engineering, 2001