Untrimmed BGR of 1.1% $3\sigma$ Based on Dynamic-Biased Op Amp With Reduced ${V} _{\rm off}$

Authors:

Abstract
The paper presents an untrimmed sub-1V CMOS bandgap reference (BGR) where a dynamic-biased error amplifier (EA) is invented to accomplish small input-referred offset voltage (Voff) and improve PSRR of BGR. In the dynamic-biased EA, an intended negative-feedback loop does dominantly work on the reduction of Voff and supply noise influx. Simulation results confirm that Voff of the proposed EA represents 2.3 % distribution whereas each Voff of the separate biased EA and the conventional EA shows 4.8 % and 15 % distributions, respectively. And the PSRR of the proposed EA-based BGR is increased by 23 dB comparing with the separate biased EA-based BGR around 2.5 MHz, and by 34 dB comparing with the conventional biased EA-based BGR around 1 MHz. By adopting the proposed feedback-biased EA, the 40-nm CMOS BGR circuit has been implemented to achieve superior 3σ inaccuracy of 1.1% and temperature variation of 13 ppm/∘C without trimming.
Funding Information
  • Electronics and Telecommunications Research Institutes (ETRI) grant
  • Korean Government [Radar Core Technology] (19ZB1330)

This publication has 10 references indexed in Scilit: