Research and application of self-suspending proppants based on block copolymer modification in coalbed methane wells
Authors:
- 1 July 2025
- journal article
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (7)
Abstract
Conventional proppants exhibit limited sand-carrying capacity and incomplete gel breaking below 60 °C, resulting in inadequate fracture support and reduced stimulated reservoir volume. In this study, a self-suspending, high-salinity-resistant block copolymer was synthesized by precisely controlling the copolymer composition and topology. Based on this, a novel self-suspending proppant fracturing fluid system was developed. Its sand-carrying capacity, gel-breaking behavior, friction reduction, salt resistance, and transport performance were systematically evaluated and compared with those of emulsion polymer-based fracturing fluids. The self-suspending proppant achieved complete dispersion within 45 s and maintained suspension stability for over 25 h. It supported sand loadings up to 60%, and a small amount of proppant could carry more than ten times its weight in quartz sand. The friction reduction rate exceeded 71%, averaging 2.32% higher than that of emulsion polymer systems. The self-suspending fluid demonstrated minimal proppant settling during transport, resulting in improved placement and fracture conductivity. In contrast, emulsion polymer-based systems suffered from poor dispersion, emulsion formation, and reduced viscosity and transport distance. Field trials in the Linxing coalbed methane reservoir showed that a mixture of 10% self-suspending proppant with 26% conventional quartz sand enabled stable injection and doubled gas production compared to wells treated with emulsion polymer-based fluids. These results demonstrate the feasibility and efficiency of self-suspending proppant-based fracturing fluids for use in coalbed and shale reservoirs.Keywords
Funding Information
- National Key Research and Development Program of China (No. 2022YFE0129800)
- Beijing Nova Program (No. 20230484365)
- Fundamental Research Funds for the Central Universities (No. buctrc202404)
This publication has 38 references indexed in Scilit:
- Safety Risk Analysis of Well Control for Wellbore with Sustained Annular Pressure and Prospects for Technological DevelopmentChemistry and Technology of Fuels and Oils, 2025
- Coated proppants with self-suspension and potassium permanganate slow-release functionsFuel, 2024
- Secondary utilization of self-suspending proppant's coating polymer: Enhance oil recoveryGeoenergy Science and Engineering, 2024
- Distributed Fiber Optic Monitoring of Asymmetric Fracture Swarm Propagation in Laminated Continental Shale Oil ReservoirsRock Mechanics and Rock Engineering, 2024
- Integration analysis of 3D fractures network reconstruction and frac hits response in shale wellsEnergy, 2022
- Synthesis and properties of temperature-tolerance resistant hydrophobically associating polymer suspension agent using response surface methodColloids and Surfaces A: Physicochemical and Engineering Aspects, 2021
- Experimental study on modified polyacrylamide coated self-suspending proppantFuel, 2017
- Proppant transport study in fractures with intersectionsFuel, 2016
- Improving water-injection performance of quartz sand proppant by surface modification with surface-modified nanosilicaColloids and Surfaces A: Physicochemical and Engineering Aspects, 2015
- Hydraulic fracture initiation theory for a horizontal well in a coal seamPetroleum Science, 2013