26.3 A mm-Wave Power Amplifier for 5G Communication Using a Dual-Drive Topology Exhibiting a Maximum PAE of 50% and Maximum DE of 60% at 30GHz
Authors:
- 13 February 2021
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 64, 258-260
Abstract
The mm-wave spectrum is opening a new opportunity for TRx systems to operate at high-Gb/s data-rates. However, this opportunity is also imposing stringent requirements for power amplifiers (PAs) in terms of efficiency and linearity. To this date, all PA designs focus on increasing the peak/power-back-off (PBO) PAE and output power $(max \mathrm{P}_{out})$ by either presenting multi-harmonic terminations or improving on existing topologies, such as stacked, outphasing, and Doherty PAs [1 –3]. However, in highly scaled silicon processes with low supply voltages, these reported techniques see diminishing returns on PAE and $\mathrm{P}_{out}$ since the transistor knee voltage $(\mathrm{V}_{knee})$ becomes a significant portion of the supply voltage [5]. Moreover, an extra reduction in supply voltage is often performed in practical deployment to ensure device reliability. This is especially relevant for mm-wave array operations, where array element couplings result in substantial antenna impedance mismatches and undesired large PA voltage swings [6]. Although the reported techniques have improved overall PA efficiency at mm-wave, fundamentally they are incapable of surpassing the theoretical PA core efficiency at the same conduction angle (e.g., Class-B common-source (CS) PA) without resorting to device switching, or harmonic shaping.
Keywords
This publication has 6 references indexed in Scilit:
- A 26-42 GHz Broadband, Back-off Efficient and Vswr Tolerant CMOS Power Amplifier Architecture for 5G Applications2019
- 4.8 A Highly Linear Super-Resolution Mixed-Signal Doherty Power Amplifier for High-Efficiency mm-Wave 5G Multi-Gb/s Communications2019
- A continuous-mode harmonically tuned 19-to-29.5GHz ultra-linear PA supporting 18Gb/s at 18.4% modulation PAE and 43.5% peak PAE2018
- A 28GHz 41%-PAE linear CMOS power amplifier using a transformer-based AM-PM distortion-correction technique for 5G phased arrays2018
- A Wideband Class-AB Power Amplifier With 29–57-GHz AM–PM Compensation in 0.9-V 28-nm Bulk CMOSIEEE Journal of Solid-State Circuits, 2017
- High-Power High-Efficiency Class-E-Like Stacked mmWave PAs in SOI and Bulk CMOS: Theory and ImplementationIEEE Transactions on Microwave Theory and Techniques, 2014