Embedded One-Dimensional Orifice Elements for Slosh Load Calculations in Volume-Of-Fluid CFD
Open Access
- 22 November 2022
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 12 (23) , 11909
Abstract
For CFD liquid sloshing simulations, fine computational mesh resolutions are typically required to model the flow within small flow passages or orifices found in fuel tanks. This work presents a method of replacing the fine computational mesh elements within orifices with large one-dimensional mesh elements that integrate seamlessly with standard finite volume computational elements with the intended advantage of reducing the overall computational cost of CFD simulations. These one-dimensional elements conserve mass and momentum for two-phase flow in incompressible Volume-Of-Fluid CFD. Instead of fully resolving the momentum diffusion term, empirical correlations are used to account for the viscous losses within the orifices for both two- and three-dimensional simulations. The one-dimensional orifice elements are developed and validated against analytical and experimental results using the finite volume CFD code Elemental®. Furthermore, these elements are tested in a violent sloshing simulation and compared with full-resolution numerical results as well as experimental results. The elements are shown to decrease computational cost significantly by reducing the number of computational elements as well as increasing the simulation time step sizes (due to an increase in element sizes).Keywords
Funding Information
- European Union’s Horizon (815044)
- National Research Foundation of South Africa (89916)
This publication has 41 references indexed in Scilit:
- Single-Phase and Two-Phase Flow Through Thin and Thick Orifices in Horizontal PipesJournal of Fluids Engineering, 2012
- A matrix-free, implicit, incompressible fractional-step algorithm for fluid–structure interaction applicationsJournal of Computational Physics, 2012
- An Analysis of Baffles Designs for Limiting Fluid Slosh in Partly Filled Tank TrucksThe Open Transportation Journal, 2010
- Time-independent finite difference analysis of fully non-linear and viscous fluid sloshing in a rectangular tankJournal of Computational Physics, 2005
- Continuum thermodynamic modeling of drying capillary particulate materials via an edge-based algorithmComputer Methods in Applied Mechanics and Engineering, 2005
- A Method for Capturing Sharp Fluid Interfaces on Arbitrary MeshesJournal of Computational Physics, 1999
- Numerical simulation of sloshing waves in a 3D tank based on a finite element methodApplied Ocean Research, 1998
- Two-phase pressure drop in multiple thick- and thin-orifice platesExperimental Thermal and Fluid Science, 1997
- Note on the von Neumann stability of explicit one-dimensional advection schemesComputer Methods in Applied Mechanics and Engineering, 1994
- Volume of fluid (VOF) method for the dynamics of free boundariesJournal of Computational Physics, 1981