Dependence of Temperature and Slag Composition on Dephosphorization at the First Deslagging in BOF Steelmaking Process
Authors:
Open Access
- 12 June 2015
- journal article
- Published by Walter de Gruyter GmbH in High Temperature Materials and Processes
- Vol. 35 (4) , 433-440
Abstract
Effects of temperature and slag composition on dephosphorization in a 120 ton top-bottom combined blown converter steelmaking process by double slag method were studied. The slag properties were determined by scanning electron microscope- energy dispersive spectrometry (SEM-EDS), X-ray diffraction (XRD). The results show that the transition oxidation temperature between dephosphorization and decarbonization T f is not the favorable temperature for the first deslagging. The optimum first deslagging temperature is confirmed to be approximately 1,673 K which is about 70 K higher than T f . High melting temperatures phases (such as 3CaO·SiO 2 ) in the slag with high basicity and MgO content are unfavorable to the dephosphorization. The optimum process condition for dephosphorization at the first deslagging in present work is approximately 1,673 K in temperature, 2.0 in slag basicity, 6 and 17 mass% in MgO and T.Fe content, 6 mass% ≤ MnO content.Keywords
This publication has 9 references indexed in Scilit:
- Optimization of Low Phosphorus Steel Production With Double Slag Process in BOFJournal of Iron and Steel Research International, 2013
- Removal of Phosphorous from Steel Produced by Melting Sponge Iron in Induction FurnaceTransactions of the Indian Institute of Metals, 2013
- Development of High Efficiency Dephosphorization System in Decarburization Converter Utilizing FetO Dynamic ControlISIJ International, 2013
- The Rate of the Phosphorous Reaction Between Liquid Iron and SlagMetallurgical and Materials Transactions B, 2012
- Recovery of Phosphorus from Dephosphorization Slag Produced by Duplex High Phosphorus Hot Metal RefiningISIJ International, 2012
- Analysis of Dephosphorization Reaction Using a Simulation Model of Hot Metal Dephosphorization by Multiphase SlagISIJ International, 2009
- Reduction Behaviors of Hot Metal Dephosphorization Slag in a Slag RegeneratorISIJ International, 2006
- Effect of MgO and Al2O3variations in oxygen steelmaking (BOF) slag on slag morphology and phosphorus distributionIronmaking & Steelmaking: Processes, Products and Applications, 2005
- Improvement of reaction efficiency in hot metal dephosphorisationIronmaking & Steelmaking: Processes, Products and Applications, 2002