Extraction of Selenium and Tellurium from CaCl 2 –LiCl-Based Molten Chlorides Containing Na 2 Se, Na 2 Te, and CaO
Authors:
- Yoshiharu SakamuraYSYoshiharu Sakamura
- Tsuyoshi MurakamiTMTsuyoshi Murakami
- Koichi UozumiKUKoichi Uozumi
- 1 May 2021
- journal article
- research article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 168 (5) , 052503
Abstract
This study was conducted considering the separation of long-lived fission products of 79 Se from vitrified high-level radioactive wastes. The redox behavior of Se on various electrodes was investigated in CaCl 2 melts containing Na 2 Se and CaO at 1093 K. Se 2− ions were anodically oxidized to form selenide compounds on Cu and Ni electrodes, which were not affected by presence of O 2− ions. Potentiostatic electrolysis using a Ni anode yielded liquid Ni–Se alloy and Ni was thus evaluated as a suitable anode material for extracting Se. A chemical reaction using NiO and Ni metal was investigated for the extraction of Se as an alternative to electrodeposition. In addition, anodic deposition behaviors of Te and Se on Ni in an equimolar CaCl 2 –LiCl melt containing Na 2 Se, Na 2 Te, CaO, BaCl 2 , SrCl 2 , CsCl, KCl, and EuCl 2 were investigated. The potential difference between the Ni telluride and selenide formations was about 0.20 V, indicating that Te can be extracted prior to Se. The NiO/Ni apparatus consisting of a Ni rod immersed in NiO powder placed in a MgO crucible was used to extract Te and Se in two steps. Most of Te was first extracted. Then, the remaining Te and Se were almost completely extracted.Keywords
Funding Information
- The ImPACT Program of the Council for Science, Technology and Innovation
This publication has 14 references indexed in Scilit:
- Electrochemical Behaviors of Selenide and Telluride Ions in LiCl–KCl Eutectic MeltsJournal of the Electrochemical Society, 2020
- Electrochemical reduction behavior of simplified simulants of vitrified radioactive waste in molten CaCl2Journal of Nuclear Materials, 2018
- Editors' Choice—Behaviors of Si, B, Al, and Na during Electrochemical Reduction of Borosilicate Glass in Molten CaCl2Journal of the Electrochemical Society, 2017
- Electrochemical Reduction Behavior of Borosilicate Glass in Molten CaCl2Journal of the Electrochemical Society, 2016
- Separation and Recovery of Uranium Metal from Spent Light Water Reactor Fuel Via Electrolytic Reduction and ElectrorefiningNuclear Technology, 2010
- An Electrochemical Reduction of Uranium Oxide in the Advanced Spent-Fuel Conditioning ProcessNuclear Technology, 2008
- Electrochemical Reduction of UO[sub 2] in Molten CaCl[sub 2] or LiClJournal of the Electrochemical Society, 2006
- Reduction of TiO2 in Molten CaCl2 by Ca Deposited during CaO ElectrolysisMATERIALS TRANSACTIONS, 2004
- Direct electrochemical reduction of titanium dioxide to titanium in molten calcium chlorideNature, 2000
- Production of niobium powder by electronically mediated reaction (EMR) using calcium as a reductantJournal of Alloys and Compounds, 1999