Empirical Coastal Atmospheric Corrosion of Masonry Metal Wall Ties
Open Access
- 11 November 2021
- journal article
- research article
- Published by MDPI AG in Corrosion and Materials Degradation
- Vol. 2 (4) , 657-665
Abstract
Not counting domestic dwellings, it has been estimated that in Australia alone, some tens of thousands of masonry buildings and structures have exceeded their design life, with many of these being at risk of partial (or worse) collapse from falling or dislodged masonry. This has significant implications for human life but also for the urban environment and economic health of building owners, managers, and insurers and for local and national economies. This risk can mainly be attributed to the slow deterioration of masonry under atmospheric and other environments and the corrosion of so-called wall ties. Wall ties are relatively thin pieces of steel that tie the outer leaf of masonry walls to the stabilized inner leaf. The problem is likely severe for scenarios such as cyclonic and earthquake events, as they cause area-wide damage and the potential wide-spread loss of human life—losses that could be prevented by timely intervention. This paper reports on the in situ inspection of two case study buildings and the data obtained from controlled wall tie corrosion field trials, which are used to develop predictive models of structural response. These models will inform practical tools that will be developed for building assessment, cost-effective monitoring, and rectification, assisting in the management of existing masonry buildings.Keywords
This publication has 4 references indexed in Scilit:
- Modeling the effect of insoluble corrosion products on pitting corrosion kinetics of metalsnpj Materials Degradation, 2019
- Service life estimation of concrete infrastructures2018
- Corrosion of Steel in Concrete and Its Prevention in Aggressive Chloride-Bearing Environments2016
- Comparison of theoretical and empirically determined service lives for wall ties in brick veneer steel stud wall systemsThis article is one of a selection of papers published in this Special Issue on Masonry.Canadian Journal of Civil Engineering, 2007