Dynamic Mechanical and Creep Behaviour of Meltspun PVDF Nanocomposite Fibers
Open Access
- 23 August 2021
- journal article
- research article
- Published by MDPI AG in Nanomaterials
- Vol. 11 (8) , 2153
Abstract
Piezoelectric fibers have an important role in wearable technology as energy generators and sensors. A series of hybrid nanocomposite piezoelectric fibers of polyinylidene fluoride (PVDF) loaded with barium–titanium oxide (BT) and reduced graphene oxide (rGO) were prepared via the melt spinning method. Our previous studies show that high-performance fibers with 84% of the electroactive β-phase in the PVDF generated a peak output voltage up to 1.3 V and a power density of 3 W kg−1. Herein, the dynamic mechanical and creep behavior of these fibers were investigated to evaluate their durability and piezoelectric performance. Dynamic mechanical analysis (DMA) was used to provide phenomenological information regarding the viscoelastic properties of the fibers in the longitudinal direction. DSC and SEM were employed to characterize the crystalline structure of the samples. The storage modulus and the loss tangent increased by increasing the frequency over the temperature range (−50 to 150 °C) for all of the fibers. The storage modulus of the PVDF/rGO nanocomposite fibers had a higher value (7.5 GPa) in comparison with other fibers. The creep and creep recovery behavior of the PVDF/nanofillers in the nanocomposite fibers have been explored in the linear viscoelastic region at three different temperatures (10–130 °C). In the PVDF/rGO nanocomposite fibers, strong sheet/matrix interfacial interaction restricted the mobility of the polymer chains, which led to a higher modulus at temperatures 60 and 130 °C.Keywords
This publication has 50 references indexed in Scilit:
- Dynamic mechanical properties and correlation with dynamic fragility of sisal reinforced compositesPolymer Composites, 2014
- Covalently linked biocompatible graphene/polycaprolactone composites for tissue engineeringCarbon, 2013
- Ionic Liquid Integrated Multiwalled Carbon Nanotube in a Poly(vinylidene fluoride) Matrix: Formation of a Piezoelectric β-Polymorph with Significant Reinforcement and Conductivity ImprovementACS Applied Materials & Interfaces, 2013
- The creep behaviour of poly(vinylidene fluoride)/“bud-branched” nanotubes nanocompositesComposites Science and Technology, 2012
- Chemically modified graphene/P(VDF-TrFE-CFE) electroactive polymer nanocomposites with superior electromechanical performanceJournal of Materials Chemistry, 2011
- Physical and mechanical properties of poly(methyl methacrylate) -functionalized graphene/poly(vinylidine fluoride) nanocomposites: Piezoelectric β polymorph formationPolymer, 2010
- Effect of synthesis conditions on the properties of wet spun polypyrrole fibresSynthetic Metals, 2009
- Integral equation and sensitivity analyses of creep behavior for PVDF thin filmsMechanics of Materials, 2008
- Effect of surface modification of nanosilica on crystallization, thermal and mechanical properties of poly(vinylidene fluoride)Journal of Materials Science, 2007
- Microstructure, crystallization and dynamic mechanical behaviour of poly(vinylidene fluoride) composites containing poly(methyl methacrylate)-grafted multiwalled carbon nanotubesNanotechnology, 2007