Thermal management of compact nanocrystalline inductors for power dense converters
- 1 March 2018
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2696-2703
Abstract
Enhanced thermal management continues to be the key to the miniaturisation of high-frequency magnetic components and to increased converter power densities. Thermal finite element analysis has been used to examine the use of high-thermal-conductivity ceramic heat spreaders in the potted structure of a nanocrystalline-cored DC inductor to mitigate the local temperature rise due to the concentrated gap losses. The thermal performance of different heat spreader and potting materials has also been investigated. The heat spreader technique is validated by experimental results on two 350 A, 60 kHz DC inductors, showing a hot spot temperature reduction of 20 °C with embedded aluminium nitride heat spreaders, which may allow a smaller core to be used. By using the heat spreaders about 30 % weight reduction is illustrated for a higher frequency DC inductor design (300 A, 150 kHz). Furthermore, the impact of the potting compound's thermal conductivity is studied, revealing that a size reduction of up to 50% is possible with the heat spreaders in addition to an improved potting material.Keywords
This publication has 13 references indexed in Scilit:
- A practical liquid-cooling design method for magnetic components of EMI filter in high power motor drives2016
- High-Frequency Gap Losses in Nanocrystalline CoresIEEE Transactions on Power Electronics, 2016
- The ideal switch is not enough2016
- Evaluation of SiC BJTs for High-Power DC–DC ConvertersIEEE Transactions on Power Electronics, 2013
- Revised Magnetics Performance Factors and Experimental Comparison of High-Flux Materials for High-Current DC–DC InductorsIEEE Transactions on Power Electronics, 2011
- Inductor winding loss owing to skin and proximity effects including harmonics in non-isolated pulse-width modulated dc–dc converters operating in continuous conduction modeIET Power Electronics, 2010
- Cooling Concepts for High Power Density Magnetic Devices2007
- Embedded Solid State Heat Extraction in Integrated Power Electronic ModulesIEEE Transactions on Power Electronics, 2005
- High Density Packaging of the Passive Components in an Automotive DC/DC ConverterIEEE Transactions on Power Electronics, 2005
- A High-Density Heat-Sink-Mounted Inductor for Automotive ApplicationsIEEE Transactions on Industry Applications, 2004