Development, characterization, and modeling of environmentally friendly open‐cell acoustic foams
- 28 January 2013
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 53 (9) , 1979-1989
Abstract
This study shows the development of new polymeric open‐cell foams from polypropylene (PP) and polylactide (PLA) resins with a focus on sound absorption properties and modeling of these foams. The objective is to develop new environmentally friendly foams to replace the existing non‐recyclable Polyurethane foams are currently used for sound insulation in industry. Through this research, open‐cell foams of about 90% porosity were fabricated from PP and PLA. These resins were selected since PP is a recyclable thermoplastic polymer, and PLA is a bio‐based thermoplastic polymer made from renewable resources. Polyurethane (PU) foam which is currently used for sound absorption and noise control in industry was compared to the fabricated PP and PLA foams. As the first attempt to fabricate environmentally friendly acoustic foams, the resulting foam structures show improved properties as compared to the existing materials. The average absorption of PP and PLA foams fabricated is in the range of 0.42–0.55 which is comparable or even higher than the average absorption of PU foam. To better understand the effect of structural and material properties on sound absorption and further improve the acoustic performance of bio‐based foams, an analytical model based on Johnson–Champoux–Allard model was used to numerically simulate the acoustic performance of foams under study. POLYM. ENG. SCI., 2013. © 2013 Society of Plastics EngineersKeywords
This publication has 18 references indexed in Scilit:
- Study of the effects of processing parameters on the sound absorption of open-cell microcellular polymeric foamsNoise Control Engineering Journal, 2010
- Mechanical and acoustic performance of compression‐molded open‐cell polypropylene foamsJournal of Applied Polymer Science, 2009
- Improvement of Cell Opening by Maintaining a High Temperature Difference in the Surface and Core of a Foam ExtrudateJournal of Cellular Plastics, 2007
- Increase of open‐cell content by plasticizing soft regions with secondary blowing agentPolymer Engineering & Science, 2005
- Preparation and characterization of poly(l-lactic acid) foamsPolymer, 1994
- New empirical equations for sound propagation in rigid frame fibrous materialsThe Journal of the Acoustical Society of America, 1992
- New Pore-Size Parameter Characterizing Transport in Porous MediaPhysical Review Letters, 1986
- Fabrication of Open-Cell Polyethylene FoamJournal of Cellular Plastics, 1973
- Generalized Theory of Acoustic Propagation in Porous Dissipative MediaThe Journal of the Acoustical Society of America, 1962
- Theory of Propagation of Elastic Waves in a Fluid-Saturated Porous Solid. I. Low-Frequency RangeThe Journal of the Acoustical Society of America, 1956