Effect of Magnetron Sputtering Power on ITO Film Deposition at Room Temperature
Authors:
- 1 August 2023
- journal article
- research article
- Published by Pleiades Publishing Ltd in Russian Microelectronics
- Vol. 52 (4) , 297-302
Abstract
Magnetron sputtering in the medium frequency (MF) mode was used to obtain ITO films on glass substrates at room temperature in an oxygen-free environment. The effect of the magnetron sputtering power on the electrophysical properties and surface morphology of ITO films is studied. It is shown that the ITO film deposition rate depends linearly on the power of magnetron sputtering in the MF mode. It is found that ITO films have a predominantly nanocrystalline structure at a magnetron sputtering power of more than 100 W. Increasing the sputtering power leads to an increase in surface roughness from 13.5 to 24.6 nm and grain size from 11.7 to 27.5 nm in the ITO film. The minimum resistivity of the ITO films is 6.82 × 10–4 Ω cm at the concentration and mobility of charge carriers of 2.48 × 1020 cm–3 and 36.8 cm2/V s, which corresponds to the optimum power of magnetron sputtering of 200 W. The results obtained correspond to a high level of surface resistance values for ITO films (34.1 Ω/□), which can be used to form transparent conducting electrodes in solar cells and memristors, both on glass and flexible substrates.Keywords
This publication has 15 references indexed in Scilit:
- Role of sputtering power on the microstructural and electro‐optical properties of ITO thin films deposited using DC sputtering techniqueIEEJ Transactions on Electrical and Electronic Engineering, 2017
- Effects of film thickness and sputtering power on properties of ITO thin films deposited by RF magnetron sputtering without oxygenJournal of Materials Science: Materials in Electronics, 2016
- Effect of ambient combinations of argon, oxygen, and hydrogen on the properties of DC magnetron sputtered indium tin oxide filmsAIP Advances, 2015
- Low temperature growth of ITO transparent conductive oxide layers in oxygen-free environment by RF magnetron sputteringJournal of Physics: Conference Series, 2013
- Crystallized Indium-Tin Oxide (ITO) Thin Films Grown at Low Temperature onto Flexible Polymer SubstratesECS Journal of Solid State Science and Technology, 2012
- ITO Films Prepared by Long-throw Magnetron Sputtering without Oxygen Partial PressureJournal of Materials Science & Technology, 2010
- Electrical and optical properties of indium tin oxide films prepared on plastic substrates by radio frequency magnetron sputteringThin Solid Films, 2008
- Polycrystalline growth and recrystallization processes in sputtered ITO thin filmsThin Solid Films, 2006
- A study of the transient plasma potential in a pulsed bi-polar dc magnetron dischargePlasma Sources Science and Technology, 2004
- Reactive pulsed magnetron sputtering process for alumina filmsJournal of Vacuum Science & Technology A, 2000