Seismic response of rocking frames with top support eccentricity
- 31 July 2018
- journal article
- research article
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 47 (12) , 2496-2518
Abstract
Summary: The seismic response of rocking frames that consist of a rigid beam freely supported on rigid freestanding rectangular piers has received recent attention in the literature. Past studies have investigated the special case where, upon planar rocking motion, the beam maintains contact with the piers at their extreme edges. However, in many real scenarios, the beam‐to‐pier contact lies closer to the center of the pier, affecting the overall stability of the system. This paper investigates the seismic response of rocking frames under the more general case which allows the contact edge to reside anywhere in‐between the center of the pier and its extreme edge. The study introduces a rocking block model that is dynamically equivalent to a rocking frame with vertically symmetric piers of any geometry. The impact of top eccentricity (ie, the distance of the contact edge from the pier's vertical axis of symmetry) on the seismic response of rocking frames is investigated under pulse excitations and earthquake records. It is concluded that the stability of a top‐heavy rocking frame is highly influenced by the top eccentricity. For instance, a rocking frame with contacts at the extreme edges of the piers can be more seismically stable than a solitary block that is identical to one of the frame's piers, while a rocking frame with contacts closer to the centers of the piers can be less stable. The concept of critical eccentricity is introduced, beyond which the coefficient of restitution contributes to a greater reduction in the response of a frame than of a solitary pier.Keywords
Funding Information
- Natural Sciences and Engineering Research Council of Canada
This publication has 29 references indexed in Scilit:
- Seismic response analysis of multidrum classical columnsEarthquake Engineering & Structural Dynamics, 2005
- The rocking spectrum and the limitations of practical design methodologiesEarthquake Engineering & Structural Dynamics, 2002
- Dynamic analysis of stacked rigid blocksSoil Dynamics and Earthquake Engineering, 2001
- Rocking Response of Free-Standing Blocks under Cycloidal PulsesJournal of Engineering Mechanics, 2001
- Dynamic behaviour of rocking two‐block assembliesEarthquake Engineering & Structural Dynamics, 1990
- On the dynamic response of rigid body assembliesEarthquake Engineering & Structural Dynamics, 1986
- Rocking response of rigid blocks to earthquakesEarthquake Engineering & Structural Dynamics, 1980
- A seismic analysis method for a block column gas-cooled reactor coreNuclear Engineering and Design, 1979
- Nonlinear dynamic analysis of a stacked fuel column subjected to boundary motionNuclear Engineering and Design, 1975
- The seismic response of a reinforced concrete bridge pier designed to stepEarthquake Engineering & Structural Dynamics, 1973