Relation between Weight Changes and Bending Properties of GFRP Panel Immersed in Hot Water
Authors:
- 1 January 1993
- journal article
- Published by SAGE Publications in Polymers and Polymer Composites
- Vol. 1 (1) , 37-44
Abstract
This study deals with the relation between weight changes and the bending properties of GFRP panels immersed in hot water. The GFRP panels used in this study were three kinds of randomly oriented E-glass fibre continuous strand mat reinforced unsaturated polyester resins. These panels were different in matrix resin and filler content. The water immersion tests were conducted at 80°C and the specimen weight before and after immersion was measured. After water immersion, three point bending tests were performed in order to evaluate the reduction in elastic modulus and strength. Weight changes were evaluated in two ways: the weight gain due to water absorption and the weight loss due to matrix dissolution. The water absorption kinetics was different from the typical Fickian diffusion behaviour, and a great amount of water penetration into the interface was associated with weight loss. Extensive weight loss due to matrix dissolution was caused by degradation at the fibre/matrix interface. The main causes of the modulus and strength reduction of GFRP immersed in water were clarified from the relation between weight changes and bending properties. The elastic modulus decreased with increasing water absorption, and eventually it became constant. The strength decreased linearly with the weight gain due to water absorption. The modulus and strength reductions were caused by the degradation of matrix resin due to water absorption-related processes, such as plasticisation and hydrolysis. However, the modulus reached a constant value in spite of a great amount of water absorption and this was caused by extensive degradation at the interface. The strength reduction observed along with matrix dissolution was caused by the reduction in the load bearing capacity of the fibre following interface breakdown.Keywords
This publication has 12 references indexed in Scilit:
- Effect of Water Temperature on Hygrothermal Aging of GFRP Panel1991
- The use of water absorption kinetic data to predict laminate property changesComposites, 1987
- Hygrothermal Damage in Graphite/Epoxy LaminatesJournal of Engineering Materials and Technology, 1987
- The hygrothermal behaviour of glass fibre reinforced Pa66 composites: A study of the effect of water absorption on their mechanical propertiesJournal of Materials Science, 1987
- Temperature dependence of hydrothermal ageing of CSM-laminate during water immersionComposites Science and Technology, 1987
- Effect of boiling water aging on strength and fracture properties of chopped strand mat–polyester laminatesJournal of Applied Polymer Science, 1985
- Water sorption and mechanical properties of a glass-reinforced polyester resinComposites, 1982
- Effect of water on the fracture behaviour of glass fibre reinforced polyestersFibre Science and Technology, 1982
- Environmental Effects on the Elastic Moduli of Composite MaterialsJournal of Composite Materials, 1977
- Effects of Moisture and Temperature on the Tensile Strength of Composite MaterialsJournal of Composite Materials, 1977