ANALYZING THE CYCLE-TO-CYCLE VARIATIONS OF PULSING SPRAY CHARACTERISTICS BY MEANS OF THE PROPER ORTHOGONAL DECOMPOSITION
Authors:
- 1 January 2013
- journal article
- Published by Begell House Inc. Publishers in Atomization and Sprays
- Vol. 23 (7) , 623-641
Abstract
This paper presents a novel approach to analyze the cycle-to-cycle variations of pulsing spray characteristics. The purpose is to quantify the cycle-to-cycle variations of the macroscopic characteristics of spark-ignition direct-injection (SIDI) fuel injector spray, so that improvements of air-fuel mixture formation can be made to enhance the combustion efficiency and reduce emissions of SIDI engines. The experiments were carried out using an eight-hole SIDI fuel injector under a controlled ambient environment with an extended range of test conditions. Using a strobe light as an illumination source, multiple cycles of macroscopic spray structure images at a fixed injection delay time were taken by a CCD camera. The proper orthogonal decomposition (POD) technique was implemented to analyze the cycle-to-cycle characteristics of spray variation. In addition, the effects of injection pressure, ambient pressure, and fuel type on spray variation were also investigated. POD analysis reveals that the mode 1 pattern captured the ensemble-averaged spray shape, the mode 2 pattern provided quantification of spatial fuel distribution variations of different cycles of spray, and higher mode patterns further quantified the finer details of the variations surrounding the well-atomized periphery of the spray structure. POD analysis also quantitatively confirms that better-atomized sprays led to slightly higher variations of finer structures along the spray boundary. Overall, this study demonstrates that POD analysis can be used as a novel approach to quantify the cycle-to-cycle variation of pulsing spray characteristics.Keywords
This publication has 18 references indexed in Scilit:
- Laser sheet dropsizing of evaporating sprays using simultaneous LIEF/MIE techniquesProceedings of the Combustion Institute, 2013
- High speed imaging in fundamental and applied combustion researchProceedings of the Combustion Institute, 2013
- Macroscopic characteristics for direct-injection multi-hole sprays using dimensionless analysisExperimental Thermal and Fluid Science, 2012
- Atomization and vaporization for flash-boiling multi-hole sprays with alcohol fuelsFuel, 2012
- Analysis of misfires in a direct injection engine using proper orthogonal decompositionExperiments in Fluids, 2011
- Spatio-temporal structure and cycle to cycle variations of an in-cylinder tumbling flowExperiments in Fluids, 2010
- Large Eddy Simulation of a Motored Single-Cylinder Piston Engine: Numerical Strategies and ValidationFlow, Turbulence and Combustion, 2010
- High-speed imaging for direct-injection gasoline engine research and developmentExperiments in Fluids, 2010
- Mechanisms of spray formation and combustion from a multi-hole injector with E85 and gasolineCombustion and Flame, 2010
- Cyclic variations of the swirling flow in a Diesel transparent engineExperiments in Fluids, 2006