E-Skin Bimodal Sensors for Robotics and Prosthesis Using PDMS Molds Engraved by Laser
Open Access
Abstract
Electronic skin (e-skin) is pursued as a key component in robotics and prosthesis to confer them sensing properties that mimic human skin. For pressure monitoring, a great emphasis on piezoresistive sensors was registered due to the simplicity of sensor design and readout mechanism. For higher sensitivity, films composing these sensors may be micro-structured, usually by expensive photolithography techniques or low-cost and low-customizable molds. Sensors commonly present different sensitivities in different pressure ranges, which should be avoided in robotics and prosthesis applications. The combination of pressure sensing and temperature is also relevant for the field and has room for improvement. This work proposes an alternative approach for film micro-structuration based on the production of highly customizable and low-cost molds through laser engraving. These bimodal e-skin piezoresistive and temperature sensors could achieve a stable sensitivity of −6.4 × 10−3 kPa−1 from 1.6 kPa to 100 kPa, with a very robust and reproducible performance over 27,500 cycles of objects grasping and releasing and an exceptionally high temperature coefficient of resistance (TCR) of 8.3%/°C. These results point toward the versatility and high benefit/cost ratio of the laser engraving technique to produce sensors with a suitable performance for robotics and functional prosthesis.Keywords
Funding Information
- Federación Española de Enfermedades Raras (UID/CTM/50025/2013NOVA.ID.FCT)
- Fundação para a Ciência e a Tecnologia (PD/BD/105876/2014)
This publication has 52 references indexed in Scilit:
- Pursuing prosthetic electronic skinNature Materials, 2016
- Highly Skin‐Conformal Microhairy Sensor for Pulse Signal AmplificationAdvanced Materials, 2014
- Conformable amplified lead zirconate titanate sensors with enhanced piezoelectric response for cutaneous pressure monitoringNature Communications, 2014
- Giant Tunneling Piezoresistance of Composite Elastomers with Interlocked Microdome Arrays for Ultrasensitive and Multimodal Electronic SkinsACS Nano, 2014
- 25th Anniversary Article: The Evolution of Electronic Skin (E‐Skin): A Brief History, Design Considerations, and Recent ProgressAdvanced Materials, 2013
- A Flexible and Highly Pressure‐Sensitive Graphene–Polyurethane Sponge Based on Fractured Microstructure DesignAdvanced Materials, 2013
- Flexible polymer transistors with high pressure sensitivity for application in electronic skin and health monitoringNature Communications, 2013
- Elastomeric transparent capacitive sensors based on an interpenetrating composite of silver nanowires and polyurethaneApplied Physics Letters, 2013
- Conformable, flexible, large-area networks of pressure and thermal sensors with organic transistor active matrixesProceedings of the National Academy of Sciences, 2005
- A large-area, flexible pressure sensor matrix with organic field-effect transistors for artificial skin applicationsProceedings of the National Academy of Sciences, 2004