Evolution Mechanism of Sputtered Film Uniformity with the Erosion Groove Size: Integrated Simulation and Experiment
Open Access
- 18 November 2023
- Vol. 28 (22) , 7660
Abstract
In this work, Cu thin films were experimentally fabricated at different target–substrate distances by 2-inch and 4-inch circular planar magnetron targets. Meanwhile, the sputtering deposition of Cu thin films was investigated via an integrated multiscale simulation, where the magnetron sputtering discharge was modeled using the Monte Carlo (MC) method, and the sputtered particle transport was simulated using a coupled Monte Carlo (MC) and molecular dynamics (MD) method. Experimental results indicated that, as the target–substrate distance increased from 30 to 120 mm, the film thickness distribution of the 2-inch target sputtering changed from a bell-shaped curve to a line-shaped curve, while that of the 4-inch target sputtering varied from a saddle-shaped curve to a line-shaped curve. The simulation results were accordant with the experimental results. The simulation results revealed that, at a target–substrate distance of 30 mm, the sputtering particle flow from the 2-inch target overlapped strongly near the substrate center, leading to a bell-shaped film thickness distribution, while the increased diameter of the erosion groove on the 4-inch target reduced the superposition effect of the sputtering particle flow near the substrate center, resulting in a saddle-shaped film thickness distribution. In addition, when the target–substrate distance ranged from 30 to 120 mm, the film thickness uniformity of 4-inch target sputtering was superior to that of 2-inch target sputtering, and the underlying mechanism was discussed in detail.Keywords
Funding Information
- Hunan Provincial Natural Science Foundation of China (2022JJ30114, 22B0783)
- excellent youth funding from the Hunan Provincial Education Department (2022JJ30114, 22B0783)
This publication has 44 references indexed in Scilit:
- The metal flux from a rotating cylindrical magnetron: a Monte Carlo simulationJournal of Physics D: Applied Physics, 2008
- PIC – MCC Numerical Simulation of a DC Planar MagnetronPlasma Processes and Polymers, 2006
- Computational Studies of Plasma Generation and Control in a Magnetron Sputtering SystemJapanese Journal of Applied Physics, 1999
- Transport of sputtered atoms in facing targets sputtering geometry: A numerical simulation studyJournal of Applied Physics, 1998
- Theoretical analysis of film uniformity in spinning processesChemical Engineering Science, 1995
- Three-Dimensional Simulation of Target Erosion in DC Magnetron SputteringJapanese Journal of Applied Physics, 1994
- Computational Studies on the Shape and Control of Plasmas in Magnetron Sputtering SystemsJapanese Journal of Applied Physics, 1993
- Energy and angular distributions of sputtered atoms at normal incidenceRadiation Effects and Defects in Solids, 1991
- Magnetron plasma diagnostics and processing implicationsJournal of Vacuum Science & Technology A, 1988
- Total cross sections for electron scattering by Ne, Ar, Kr and XeJournal of Physics B: Atomic and Molecular Physics, 1979