Tidal energy machines: A comparative life cycle assessment study
Authors:
- 7 November 2013
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment
- Vol. 229 (2) , 124-140
Abstract
Marine energy in the United Kingdom is undergoing a period of growth in terms of development and implementation. The current installed tidal energy capacity is expected to rise to provide 20% of the United Kingdom’s electricity demand by 2050. This article used life cycle assessment to study four tidal energy devices, comparing their embodied energy and carbon dioxide emissions. The device designs studied included a multi-blade turbine, two three-blade horizontal axis turbine machines and an Archimedes’ screw device. These machines were chosen to represent a cross section of design for the device, foundation, installation and operation. Embodied energy was considered over the lifetime of each device. Energy use from fabrication, transport, installation, maintenance, decommissioning and recycling was all calculated and compared to the energy generated by each device. Finally, the embodied energy, CO 2 intensity and energy payback periods were compared to those of conventional power generating systems and other renewable energy sources. Devices were studied based on a functional unit, defined as a 10 MW array installed for 100 years. Of the devices studied, the OpenHydro Open Centre turbine was found to have the best ratio of generated to embodied energy. All devices achieved CO 2 and energy payback within 12 years and exhibited CO 2 intensity between 18 and 35 gCO 2 /kW h. This compares favourably against current energy sources such as wind (8–12 gCO 2 /kW h), solar photovoltaic (~30 gCO 2 /kW h), nuclear (~70 gCO 2 /kW h) and coal (~1000 gCO 2 /kW h).Keywords
This publication has 6 references indexed in Scilit:
- Barriers to the Deployment of a 100 MW Tidal Energy Array in the UKInternational Journal of Energy Engineering, 2013
- Generating electricity from the oceansRenewable and Sustainable Energy Reviews, 2011
- Optimal turbine spacing in fully developed wind farm boundary layersWind Energy, 2011
- Recycling wind turbine bladesRenewable Energy Focus, 2009
- Valuing the greenhouse gas emissions from nuclear power: A critical surveyEnergy Policy, 2008
- Life cycle assessment of the Seagen marine current turbineProceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 2008