Design, fabrication, and evaluation of an internally cooled silicon carbide mirror
Authors:
- 1 March 2002
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 73 (3) , 1537-1540
Abstract
In this article, the design, fabrication, prepolish coating, and polishing of a reaction-bonded (RB) internally cooled silicon carbide (SiC) mirror is described. The mirror was developed from a mold of SiC powder in a near-net shape and then infused with silicon vapor to make a dense mirror substrate. The mirror surface was then rough polished, coated with a thin layer of SiC, and polished to a final fine finish. The design and manufacturing of this mirror—intended to be used as a multilayer substrate on a high-heat-load undulator beamline—are described, and data on the surface figure and finish are provided. This type of mirror can provide an attractive alternative to internally cooled silicon mirrors. Because the substrate is made in one piece, it avoids the frit or metal bonding that is usually necessary with silicon substrates. Advantages of RB SiC mirrors include lower cost and higher reliability.Keywords
This publication has 6 references indexed in Scilit:
- Improvements in the accuracy and the repeatability of long trace profiler measurementsApplied Optics, 1999
- Water-cooled crystal and multilayer optics for a wiggler beamline1998
- Water-cooled first crystal as a solution for the high-heat-load problem at the SPring-8 undulator beamlines1998
- Design and fabrication of a 1.2-m long internally cooled silicon x-ray mirror for APS1996
- Chemical-vapor-deposited SiC for high heat flux applications1996
- Multilayer optics for intense synchrotron x-ray beams: Recent results on their performanceReview of Scientific Instruments, 1992