Optimizing Miniscrew Stability: A Finite Element Study of Titanium Screw Insertion Angles
Open Access
- 1 October 2025
- journal article
- research article
- Published by MDPI AG in Biomimetics
- Vol. 10 (10) , 650
Abstract
This study aimed to evaluate how different insertion angles of titanium orthodontic miniscrews (30°, 45°, and 90°) influence stress distribution and displacement in surrounding alveolar bone using three-dimensional finite element analysis (FEA), with a focus on biomechanical outcomes at the titanium–bone interface. The 90° insertion angle generated the highest stress in cortical bone (58.2 MPa) but the lowest displacement (0.023 mm), while the 30° angle produced lower stress (36.4 MPa) but greater displacement (0.052 mm). The 45° angle represented a compromise, combining moderate stress (42.7 MPa) and displacement (0.035 mm). This simulation-based study was conducted between January and April 2025 at the Department of Orthodontics, Kocaeli Health and Technology University. A standardized 3D mandibular bone model (2 mm cortical and 13 mm cancellous layers) was constructed, and Ti-6Al-4V miniscrews (1.6 mm × 8 mm) were virtually inserted at 30°, 45°, and 90°. A horizontal orthodontic load of 2 N was applied, and von Mises stress and displacement values were calculated in ANSYS Workbench. Stress patterns were visualized using color-coded maps. The 90° insertion angle generated the highest von Mises stress in cortical bone (50.6 MPa), with a total maximum stress of 58.2 MPa, followed by 45° (42.7 MPa) and 30° (36.4 MPa) insertions (p < 0.001). Stress was predominantly concentrated at the cortical entry point, especially in the 90° model. In terms of displacement, the 90° group exhibited the lowest mean displacement (0.023 ± 0.002 mm), followed by 45° (0.035 ± 0.003 mm) and 30° (0.052 ± 0.004 mm), with statistically significant differences among all groups (p < 0.001). The 45° angle showed a balanced biomechanical profile, combining moderate stress and displacement values, as confirmed by post hoc analysis. From a biomimetics perspective, understanding how insertion angle affects bone response provides insights for designing bio-inspired anchorage systems. By simulating natural stress dissipation, this study demonstrates that insertion angle strongly modulates miniscrew performance. Vertical placement (90°) ensures rigidity but concentrates cortical stress, whereas oblique placement, particularly at 45°, offers a balanced compromise with adequate stability and reduced stress. These results emphasize that beyond material properties, surgical parameters such as insertion angle are critical for clinical success.Keywords
This publication has 44 references indexed in Scilit:
- Optimizing mandibular second molar mesialization: A comparative analysis of stress distribution and displacement using tie-back and temporary skeletal anchorage device-assisted mechanisms with a nonlinear finite element modelAmerican Journal of Orthodontics and Dentofacial Orthopedics, 2025
- Comparison of stress distribution and displacement pattern of maxillary expansion in craniomaxillary complex using rapid maxillary expander and maxillary skeletal expander: A finite element model analysisInternational Orthodontics, 2025
- What is the impact of patient attributes, implant characteristics, surgical techniques, and placement location on the success of orthodontic mini-implants in young adults? A Systematic Review and Meta-AnalysisThe Saudi Dental Journal, 2024
- The effect of surface roughening on the success of orthodontic mini-implants: A systematic review and meta-analysisAmerican Journal of Orthodontics and Dentofacial Orthopedics, 2023
- Stress distribution patterns in mini-implant and bone in the infra-zygomatic crest region at different angulations: A finite element studyJournal of the World Federation of Orthodontists, 2021
- Multiscale modeling methods in biomechanicsWIREs Mechanisms of Disease, 2017
- Mussel‐Inspired Adhesive Binders for High‐Performance Silicon Nanoparticle Anodes in Lithium‐Ion BatteriesAdvanced Materials, 2012
- Biological materials: Structure and mechanical propertiesProgress in Materials Science, 2008
- Nature’s hierarchical materialsProgress in Materials Science, 2007
- Root proximity is a major factor for screw failure in orthodontic anchorageAmerican Journal of Orthodontics and Dentofacial Orthopedics, 2007