Numerical simulation of condensation for R410A at a different saturation temperature in mini/micro tubes
- 1 February 2016
- journal article
- research article
- Published by Taylor & Francis in Numerical Heat Transfer, Part A: Applications
- Vol. 69 (8) , 1-16
Abstract
Heat transfer and pressure drop characteristics of condensation for R410A inside horizontal tubes (dh = 0.25, 1, and 4 mm) at saturation temperatures Tsat = 310, 320, and 330 K are investigated numerically. Liquid–vapor interfaces and stream traces are also presented to provide a better understanding of the effect of saturation temperature on the condensation process inside micro tubes. The results indicate that local heat transfer coefficients and pressure drop gradients increase with increasing mass flux and vapor quality and with decreasing tube diameter and saturation temperature. Liquid film thickness also increases with increasing saturation temperature because of the lower surface tension at a higher saturation temperature. When gravity dominates the condensation process, a vortex with its core lying at the bottom of the tube is found in the vapor phase region. For annular flow regime at dh = 0.25 mm, the vortex disappears, and stream traces point from the symmetry plan to the liquid–vapor interface, where the vapor phase turns into the liquid phase. Numerical heat transfer coefficients and pressure drop gradients are compared with available empirical correlations. Two new models for heat transfer coefficients and frictional pressure drop gradients are developed based on the numerical work. A reasonable agreement between predicted and numerical results is obtained.Keywords
This publication has 28 references indexed in Scilit:
- Universal approach to predicting two-phase frictional pressure drop for adiabatic and condensing mini/micro-channel flowsInternational Journal of Heat and Mass Transfer, 2012
- Theoretical model for annular flow condensation in rectangular micro-channelsInternational Journal of Heat and Mass Transfer, 2012
- A general correlation for adiabatic two-phase pressure drop in micro/mini-channelsInternational Journal of Heat and Mass Transfer, 2010
- Correlations of two-phase frictional pressure drop and void fraction in mini-channelInternational Journal of Heat and Mass Transfer, 2010
- Condensation in Horizontal Smooth Tubes: A New Heat Transfer Model for Heat Exchanger DesignHeat Transfer Engineering, 2006
- Condensation in horizontal tubes, part 1: two-phase flow pattern mapInternational Journal of Heat and Mass Transfer, 2003
- Condensation in horizontal tubes, part 2: new heat transfer model based on flow regimesInternational Journal of Heat and Mass Transfer, 2003
- Correlation of two-phase friction for refrigerants in small-diameter tubesExperimental Thermal and Fluid Science, 2001
- Condensation in Smooth Horizontal TubesJournal of Heat Transfer, 1998
- A general correlation for heat transfer during film condensation inside pipesInternational Journal of Heat and Mass Transfer, 1979