Numerical Simulation and Process Optimization of Magnesium Alloy Vehicle Dashboard Cross Car Beam (CCB) Based on MAGMA
Open Access
Abstract
At present, the qualified rate of large thin-walled magnesium alloy castings is low. In this study, the effects of mold structure and process parameters were investigated to improve the production qualification rate of castings. The filling process of die castings was simulated by numerical simulation technology to optimize their structure. On the basis of an optimized mold structure, the process parameters of die castings were optimized using a response surface model, and a group of optimal process combinations were obtained: pouring temperature—660 °C; mold preheating temperature—200 °C; injection speed—6.5 m/s. The rationality of the optimized mold structure and process parameters is verified by die-casting experiments. The results show that the optimized mold structure and process parameters can effectively reduce the internal shrinkage cavity casting defects of automotive CCB castings, and effectively improve the production qualification rate of magnesium alloy CCB castings. This research has important guiding significance for the production of large thin-walled magnesium alloy parts.Keywords
Funding Information
- Zhejiang Key Research and Development Program (2022C01081)
This publication has 17 references indexed in Scilit:
- A Review on Casting Magnesium Alloys: Modification of Commercial Alloys and Development of New AlloysJournal of Materials Science & Technology, 2016
- Failure behavior of high pressure die casting AZ91D magnesium alloyMaterials Science and Engineering: A, 2016
- Numerical Simulation on the Die Casting Forming Process of a Magnesium Alloy Bearing Block2016
- Effect of Hydrostatic Pressure on the 3D Porosity Distribution and Mechanical Behavior of a High Pressure Die Cast Mg AZ91 AlloyMetallurgical and Materials Transactions A, 2015
- Scaling Invariance of Fatigue Crack Growth in Aluminum AlloyProcedia Materials Science, 2014
- The influence of hot‐chamber die casting parameters on the microstructure and mechanical properties of magnesium‐aluminum alloys containing alkaline elementsMaterialwissenschaft und Werkstofftechnik, 2012
- Magnesium and its alloys applications in automotive industryThe International Journal of Advanced Manufacturing Technology, 2007
- Study on Pressure Variations in the Mold of Magnesium Alloy Die Castings2007
- Use of Taguchi method to develop a robust design for the magnesium alloy die casting processMaterials Science and Engineering: A, 2004
- Effects of Process Settings on the Porosity Levels of AM60B Magnesium Die ““CastingsMaterials and Manufacturing Processes, 2000