Effect of Heat Treatment and Carbon on Stress Corrosion Cracking of Iron and Mild Steel in Sodium Phosphate Solution
Author:
- 1 May 1984
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 40 (5) , 232-239
Abstract
Stress corrosion cracking of ARMCO iron and Fe-C materials with up to 0.1 Wt% C was examined at 25 C in 1 M NaH2PO4 of pH 4.0 at a potential of −0.1 V saturated calomel electrode (SCE) in constant strain rate tests. Heat treatment of the materials involved annealing, quenching from 800 C, and aging at 150 C. Effect of carbon on anodic dissolution in the absence of stress was examined on Fe-C materials containing up to 1.3% C, quenched from 950 C. It was found that small amounts of carbon promoted intergranular cracking, whereas large amounts facilitated transgranular cracking, but hindered the formation of intergranular cracks. Scanning electron microscope examinations suggested an occasional formation of corrosion tunnels along crack planes. Carbon decreased anodic dissolution of iron at potentials in the active region, but it enhanced iron dissolution in the passive region. It was suggested that both intergranular and transgranular cracking were largely associated with the deterioration of a passivating film by carbon.Keywords
This publication has 19 references indexed in Scilit:
- Stress corrosion cracking of armco iron in phosphate solutionsCorrosion Science, 1979
- Influence of adsorbed sulfur on surface reaction kinetics and surface self-diffusion on ironSurface Science, 1977
- Equilibrium surface segragation of carbon on iron (100) facesScripta Metallurgica, 1975
- Stress corrosion cracking of alpha brass in a tarnishing ammoniacal environment: Fractography and chemical analysisMetallurgical Transactions A, 1975
- A Theory for the Propagation of Stress Corrosion Cracks in MetalsJournal of the Electrochemical Society, 1972
- The mechanism of stress—corrosion cracking in pure Fe-base alloysCorrosion Science, 1971
- Effect of C on the corrosion of Fe in NH4NO3 solution within a wide potential rangeCorrosion Science, 1970
- Über die Spannungsrißkorrosion weicher Stähle in konzentrierter NatronlaugeArchiv für das Eisenhüttenwesen, 1968
- Kinetic features of stress-corrosion crackingCorrosion Science, 1967
- Über den Einfluß von Kohlenstoff und Stickstoff auf die Empfindlichkeit niedriglegierter Stähle gegen SpannungsrißkorrosionMaterials and Corrosion, 1966