Single-digit 6-nm multilevel patterns by electron beam grayscale lithography
Authors:
Open Access
- 22 April 2019
- journal article
- research article
- Published by Frontiers Media SA in Advanced Optical Technologies
- Vol. 8 (3-4) , 175-180
Abstract
We report on the fabrication of very high-resolution discrete four-resist-level grayscale patterns in poly(methyl methacrylate) with just 6-nm step height and down to 32-nm step width using dose-modulated, grayscale electron beam lithography and a low-contrast resist-developer system. This direct pattern writing is important for replication in high-volume manufacturing of diffractive optics. An innovative concept of unexposed auxiliary spacers helped to enhance the discrete character of the multi-level patterns. For pattern step widths between 100 and 32 nm, a transformation toward blazed gratings with increasingly continuous-slope character was obtained. All high-resolution patterns were prepared in a single exposure and development process from an initially about 30-nm thin film. The pattern roughness due to a relatively large polymer molecular weight was reduced using selective thermal annealing with only minimally affecting the global pattern shape by reflow. The results will enable further approaches toward single-digit vertical and prospectively single-digit lateral resolution grayscale patterns.Keywords
This publication has 29 references indexed in Scilit:
- Three dimensional on 300mm wafer scale nano imprint lithography processesMicroelectronic Engineering, 2013
- Metal hierarchical patterning by direct nanoimprint lithographyScientific Reports, 2013
- Selective profile transformation of electron-beam exposed multilevel resist structures based on a molecular weight dependent thermal reflowJournal of Vacuum Science & Technology B, 2011
- Nanofluidic structures with complex three-dimensional surfacesNanotechnology, 2009
- Efficient diffractive optics made by single-step electron beam lithography in solid PMMAJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1997
- Fabrication of diffractive optical elements using a single optical exposure with a gray level maskJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1995
- Three-dimensional design in electron-beam lithographyJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1995
- One-step 3D shaping using a gray-tone mask for optical and microelectronic applicationsMicroelectronic Engineering, 1994
- Continuous-relief diffractive optical elements for two-dimensional array generationApplied Optics, 1993
- Single photomask, multilevel kinoforms in quartz and photoresist: manufacture and evaluationApplied Optics, 1990