Critical Role of Etching Parameters in the Evolution of Nano Micro SLA Surface on the Ti6Al4V Alloy Dental Implants
Open Access
Abstract
The surface of dental implants plays a vital role in early and more predictable osseointegration. SLA (sandblasted large grit and acid-etched) represents the most widely accepted, long-term clinically proven surface. Primarily, dental implants are manufactured by either commercially pure titanium (CP-Ti) or Ti6Al4V ELI alloy. The acid etch behavior of CP-Ti is well known and its effects on the surface microstructure and physicochemical properties have been studied by various researchers in the past. However, there is a lack of studies showing the effect of acid etching parameters on the Ti6Al4V alloy surface. The requirement of the narrow diameter implants necessitates implant manufacturing from alloys due to their high mechanical properties. Hence, it is necessary to have an insight on the behavior of acid etching of the alloy surface as it might be different due to changed compositions and microstructure, which can further influence the osseointegration process. The present research was carried out to study the effect of acid etching parameters on Ti6Al4V ELI alloy surface properties and the optimization of process parameters to produce micro- and nanotopography on the dental implant surface. This study shows that the Ti6Al4V ELI alloy depicts an entirely different surface topography compared to CP-Ti. Moreover, the surface topography of the Ti6Al4V ELI alloy was also different when etching was done at room temperature compared to high temperature, which in turn affected the behavior of the cell on these surfaces. Both microns and nano-level topography were achieved through the optimized parameters of acid etching on Ti6Al4V ELI alloy dental implant surface along with improved roughness, hydrophilicity, and enhanced cytocompatibility.Keywords
Funding Information
- Council for Industrial Research India (RP02756)
This publication has 55 references indexed in Scilit:
- No Positive Effect of Acid Etching or Plasma Cleaning on Osseointegration of Titanium Implants in a Canine Femoral Condyle Press-Fit ModelThe Open Orthopaedics Journal, 2013
- Dead cell counts during serum cultivation are underestimated by the fluorescent live/dead assayBiotechnology Journal, 2011
- Titanium hydride and hydrogen concentration in acid‐etched commercially pure titanium and titanium alloy implants: a comparative analysis of five implant systemsClinical Oral Implants Research, 2010
- Influence of nanoscale surface topography on protein adsorption and cellular responseNano Today, 2010
- The effect of thread pattern upon implant osseointegrationClinical Oral Implants Research, 2010
- Effects of titanium surface topography on bone integration: a systematic reviewClinical Oral Implants Research, 2009
- In vivo severe corrosion and hydrogen embrittlement of retrieved modular body titanium alloy hip‐implantsJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2008
- Replacement of teeth exhibiting periapical pathology by immediate implants. A prospective, controlled clinical trialClinical Oral Implants Research, 2007
- Surface modifications and cell–materials interactions with anodized TiActa Biomaterialia, 2007
- Enhancing surface free energy and hydrophilicity through chemical modification of microstructured titanium implant surfacesJournal of Biomedical Materials Research Part A, 2005