Influence of silicoating, etching and heated glaze treatment on the surface of Y-TZP and its impact on bonding with veneering ceramic
- 14 November 2017
- journal article
- research article
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 32 (10) , 1055-1065
Abstract
The study aimed to investigate the influence of surface treatments of Y-TZP on its topography and their impact on shear bond strength (SBS) of Y-TZP to veneering porcelain. Thirty-four zirconia cubes (Cercon) (10 × 10 × 10 mm3) were divided randomly into 3 groups (n = 11) according to the different surface treatments, Silica Coating (SC); Hot Solution Etching (HE); and Heat Treatment after porcelain glaze and powder application (GP). Porcelain application (IPs e.max) was performed after surface treatment using a standardized technique. Porcelain application (Ceramco-3) was also performed on 10 metal cubes (I BOND 2) as controls (MC). Specimens were subjected to thermocycling (5–55 °C, 20,000 cycles) followed by SBS testing in a universal testing machine. Surface topography was assessed by scanning electron microscopy and surface roughness (Image J). SC developed significantly higher SBS (42.10 ± 5.84 MPa) of Y-TZP to veneering ceramics compared to treatment by HE (24.0 ± 6.4 MPa), GP (23.30 ± 4.72), and the MC (29.3 ± 5.4 MPa) control (p < 0.05). SBS among HE, GP and MC specimens was comparable (p > 0.05). Y-TZP specimens treated with SC and HE showed high surface roughness compared to GP. Silicoating of Y-TZP prior to veneering can potentially reduce the high failure rates of zirconia-based restorations by enhancing the chemical bond between the core and the veneer materials.Keywords
Funding Information
- Deanship of Scientific Research at King Saud University (PRG-1437-38)
- Deanship of Scientific Research at King Saud University (RG-1438-075)
This publication has 27 references indexed in Scilit:
- Two-body wear of different ceramic materials opposed to zirconia ceramicThe Journal of Prosthetic Dentistry, 2010
- Morphological analysis of three zirconium oxide ceramics: Effect of surface treatmentsDental Materials, 2010
- Influence of different surface treatments on surface zirconia frameworksJournal of Dentistry, 2009
- Shear bond strengths between different zirconia cores and veneering ceramics and their susceptibility to thermocyclingDental Materials, 2008
- Innovations in bonding to zirconia-based materials: Part IDental Materials, 2008
- Selective infiltration-etching technique for a strong and durable bond of resin cements to zirconia-based materialsThe Journal of Prosthetic Dentistry, 2007
- An overview of zirconia ceramics: Basic properties and clinical applicationsJournal of Dentistry, 2007
- Microtensile bond strength of different components of core veneered all-ceramic restorationsDental Materials, 2006
- Influence of surface and heat treatments on the flexural strength of Y-TZP dental ceramicJournal of Dentistry, 2005
- Shear strength of core-veneer interface in bi-layered ceramicsThe Journal of Prosthetic Dentistry, 2004