Comparative Study of Novel Tubular Partitioned Stator Permanent Magnet Machines
Authors:
- 3 September 2015
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 52 (1) , 1-7
Abstract
Permanent magnet (PM) tubular machines have been applied to many applications, since they offer high force density with no end winding and no net attractive force between the mover and the stator. In this paper, two novel PM tubular machines named partitioned stator interior PM (PS-IPM) and partitioned stator surface-mounted PM (PS-SPM) tubular machines are proposed. Both the proposed machines are optimized for maximum thrust force, and their electromagnetic performance has been compared. It is found that the PS-IPM tubular machine has higher thrust force capability and better magnet utilization compared with the PS-SPM tubular machine. However, due to lower cogging force, the PS-SPM tubular machine has fewer thrust force ripples. Furthermore, the effect of the cross-coupling magnetic saturation on PM flux linkage, and the d-axis and q-axis inductances for both the proposed machines is investigated. It is demonstrated that the PM flux linkage and the d-axis and q-axis inductances are affected by the cross-coupling magnetic saturation. Moreover, the force-velocity characteristics of the proposed machines are calculated and compared. It is observed that both the machines have good constant power operation capability.Keywords
This publication has 18 references indexed in Scilit:
- Overview of recent advances in innovative electrical machines — With particular reference to magnetically geared switched flux machines2014
- Design and modeling of three-phase tubular linear flux-switching permanent magnet motor2014
- A new tubular fault-tolerant permanent-magnet motor for active vehicle suspension2012
- Modeling of a Complementary and Modular Linear Flux-Switching Permanent Magnet Motor for Urban Rail Transit ApplicationsIEEE Transactions on Energy Conversion, 2012
- Influence of Skew and Cross-Coupling on Flux-Weakening Performance of Permanent-Magnet Brushless AC MachinesIEEE Transactions on Magnetics, 2009
- Design Considerations for Tubular Flux-Switching Permanent Magnet MachinesIEEE Transactions on Magnetics, 2008
- Efficiency evaluation of linear permanent magnet synchronous machines using the synthetic loading method2008
- Flux Distribution in Linear Permanent-Magnet Synchronous Machines Including Longitudinal End EffectsIEEE Transactions on Magnetics, 2007
- Reduction of cogging force in slotlesslinear permanent magnet motorsIEE Proceedings - Electric Power Applications, 1997
- Interior permanent magnet linear synchronous motor for high-performance drivesIEEE Transactions on Industry Applications, 1997