Analysis of flame stabilization limit in a cylindrical of step micro-combustor with different material through the numerical simulation
Open Access
- 12 September 2018
- journal article
- research article
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 197, 08003
Abstract
The flame stabilization limit on micro-combustor had studied to support the micro power generator system. Micro-combustion became the crucial components in a micro power generation system as heat resource that will be converted into electricity. However, the unstable flame in micro-combustor became the main problem that faced by researchers, especially the excess of heat losses. The objective of this study is to observe the flame stabilization limit in a rearward facing step micro-combustor. This study was focused on the effect of micro-combustor material and flame stabilization through the numerical simulation. The micro-combustor material that was used in this study is quartz glass and stainless steel. Micro-combustor was divided into unburned region and burned region. The dimensions of micro-combustor are 3.5 mm inner diameter of unburned region, 4.5 mm inner diameter of burned region and 1 mm thickness. The results have shown that the material of micro-combustor and model of the flame holder have direct relationship with the characteristics of flame stabilization in the micro-combustors. The effects of the flame holder designs and micro-combustors dimensions on the flame stabilization were discussed in detail in this paper.Keywords
This publication has 10 references indexed in Scilit:
- The CFD Simulation of Cyclone Separator without and with the Counter-cone in the Gasification ProcessIOP Conference Series: Materials Science and Engineering, 2018
- A numerical study of propane-air combustion in meso-scale tube combustors with concentric ringsJournal of Thermal Science and Technology, 2015
- Experimental studies on flame stabilization in a three step rearward facing configuration based micro channel combustorApplied Thermal Engineering, 2013
- Combustion of gaseous and liquid fuels in meso-scale tubes with wire meshProceedings of the Combustion Institute, 2013
- Advances and challenges in the development of power-generation systems at small scalesProgress in Energy and Combustion Science, 2011
- Development of micro power generators – A reviewApplied Energy, 2011
- Micro and mesoscale combustionProceedings of the Combustion Institute, 2011
- The development of a micropower (micro-thermophotovoltaic) deviceJournal of Power Sources, 2007
- A CFD study of propane/air microflame stabilityCombustion and Flame, 2004
- Micropower generation using combustion: Issues and approachesProceedings of the Combustion Institute, 2002