Direct Coagulation Casting of Alumina Suspension by High Valence Counter Ions Using Ca ( IO 3 ) 2 as Coagulating Agent
Authors:
- 22 May 2012
- journal article
- research article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 95 (8) , 2525-2530
Abstract
A new direct coagulation casting of aqueous alumina suspension was developed via controlled release of high valence counter ions from calcium iodate with increase in the temperature from 55°C to 70°C. The influence of calcium iodate on the rheology of alumina suspension was investigated. A small amount of calcium iodate increased the viscosity of the concentrated alumina suspension at high temperature and finally transformed it into a wet‐coagulated body. The mechanism of coagulation is proposed such as that the solubility of calcium iodate increases with increase in temperature. The high valence Ca 2+ ions diffuse into the double electrical layer of alumina particles surface through electrostatic attraction, reduces the zeta potential, hence decreases repulsive force between particles. Also reaction between Ca 2+ and citrate leads to insufficient dispersant coverage on the particle surface. Both factors contribute to the coagulation of the suspension. The coagulation time was from 1 to 4 h by maintaining the temperature in the range of 55°C–70°C. The wet‐coagulated bodies prepared from 50 vol% alumina suspension showed a high compressive strength of 2.6–3.2 MPa with uniform microstructure. The relative density of sintered sample is 99.4% at 1550 °C for 2 h with perfect microstructure.Keywords
This publication has 22 references indexed in Scilit:
- Recent developments in gelcasting of ceramicsJournal of the European Ceramic Society, 2011
- In Situ Rheological Investigation of the Coagulation in Aqueous Alumina SuspensionsJournal of the American Ceramic Society, 2001
- Colloidal Processing of CeramicsJournal of the American Ceramic Society, 2000
- Ceramic forming using enzyme catalyzed reactionsMaterials Chemistry and Physics, 1999
- Coagulation Kinetics and Mechanical Behavior of Wet Alumina Green Bodies Produced via DCCJournal of Colloid and Interface Science, 1999
- Enzyme Catalysis of Alumina FormingKey Engineering Materials, 1998
- Review: aqueous tape casting of ceramic powdersMaterials Science and Engineering: A, 1995
- Gelcasting of AluminaJournal of the American Ceramic Society, 1991
- New Aqueous Injection Molding Process for Ceramic PowdersJournal of the American Ceramic Society, 1989
- Theory of Filtration of Ceramics: I, Slip CastingJournal of the American Ceramic Society, 1986