Design and Implementation of a Wireless Charging System Connected to the AC Grid for an E-Bike
Open Access
Abstract
This paper aims to design an IPT for wireless charging of an e-bike and to control the charge of the e-bike from the primary-side. Optimum IPT design has been made according to the 36 V battery bank requirements. The no-load condition test has been performed before charging started in the IPT system connected to the AC grid. The primary-side DC-link voltage of 4–5 V required for this test is provided by the designed forward converter. The charge control has been also made from the forward converter on the primary-side. For this, the forward converter’s operation in peak current mode (PCM) has been used. Finally, a prototype has been implemented that works at a maximum DC/DC efficiency of 87.52% in full alignment and 83.63% in 3 cm misalignment. The proposed control algorithm has been tested in this prototype at different load stages.Keywords
Funding Information
- Farba Automotive
This publication has 34 references indexed in Scilit:
- Constant Current/Voltage Charging Operation for Series-Series and Series-Parallel Compensated Wireless Power Transfer Systems Employing Primary-Side ControllerIEEE Transactions on Power Electronics, 2017
- A New Inductive Power Transfer Topology Using Direct AC–AC Converter With Active Source Current WaveshapingIEEE Transactions on Power Electronics, 2017
- An Inductive and Capacitive Integrated Coupler and Its LCL Compensation Circuit Design for Wireless Power TransferIEEE Transactions on Industry Applications, 2017
- Variable Frequency Controller for Inductive Power Transfer in Dynamic ConditionsIEEE Transactions on Power Electronics, 2016
- Design and Control of a 3 kW Wireless Power Transfer System for Electric VehiclesEnergies, 2015
- Primary-Side Power Flow Control of Wireless Power Transfer for Electric Vehicle ChargingIEEE Journal of Emerging and Selected Topics in Power Electronics, 2014
- A Double-Sided LCC Compensation Network and Its Tuning Method for Wireless Power TransferIEEE Transactions on Vehicular Technology, 2014
- Wireless battery charging: E-bike application2013
- Optimal Design of ICPT Systems Applied to Electric Vehicle Battery ChargeIEEE Transactions on Industrial Electronics, 2009
- Stability and control of inductivelycoupled power transfer systemsIEE Proceedings - Electric Power Applications, 2000