Evolution of Mechanical Properties of Porous Alumina during Free Sintering and Hot Pressing
Authors:
- 1 November 1999
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 82 (11) , 3080-3086
Abstract
This comparative study addresses the influence of microstructural evolution on mechanical properties of porous alumina sintered with and without the application of uniaxial pressure. A complete set of data on Young's modulus, long‐crack fracture toughness, and fracture strength for two alumina powders as a function of density was obtained. The evolution of fracture strength with increased density was modeled using a porosity‐dependent crack‐tip fracture toughness, linked to the contact area of grains and a porosity‐dependent size of the largest defect. The defect shape factor was found independent of porosity. A uniaxial pressure of 13 MPa during densification had negligible effect on the relation of strength to porosity.Keywords
This publication has 29 references indexed in Scilit:
- Generalized Orowan‐Petch Plot for Brittle FractureJournal of the American Ceramic Society, 1998
- Fracture of Alumina with Controlled PoresJournal of the American Ceramic Society, 1998
- Evolution of Young's Modulus, Strength, and Microstructure during Liquid‐Phase SinteringJournal of the American Ceramic Society, 1998
- Measurement of Crack Tip Toughness in Alumina as a Function of Grain SizeJournal of the American Ceramic Society, 1997
- Effective Elastic Moduli of Porous Ceramic MaterialsJournal of the American Ceramic Society, 1993
- Dependence of ceramic fracture properties on porosityJournal of Materials Science, 1993
- Assessment of Strength by Young's Modulus and Porosity: A Critical EvaluationJournal of the American Ceramic Society, 1988
- Young's modulus of porous brittle solidsJournal of Materials Science, 1987
- Expression for Effect of Porosity on Elastic Modulus of Polycrystalline Refractory Materials, Particularly Aluminum OxideJournal of the American Ceramic Society, 1961
- Effect of Porosity on Physical Properties of Sintered AluminaJournal of the American Ceramic Society, 1956