A Study on Optoelectronic Properties of Copper Zinc Tin Sulfur Selenide: A Promising Thin‐Film Material for Next Generation Solar Technology
- 26 May 2021
- journal article
- research article
- Published by Wiley in Crystal Research and Technology
- Vol. 56 (7) , 2000159
Abstract
Studies on copper zinc tin sulpher selenide (CZTSSe) thin‐film material and its applications as a base material are intensively being researched since it is an earth‐abundant, inexpensive, flexible, and interesting material for next‐generation optoelectronic technologies. Apropos, this study explores and reports the synthesis of CZTSSe thin films and their key optoelectronics characteristics. The reported films are fabricated on a soda‐lime glass substrate by using a physical vapor deposition technique, and then annealed from 250 to 450 °C. From the X‐ray diffraction analysis, the structure of the as‐deposited thin films is found to be amorphous in nature. Annealed thin films of CZTSSe exhibit polycrystalline nature with an average crystallite size of 46.3 nm in tetragonal structure. To determine the bandgap energy, as well as optical properties, the visible spectrophotometer, and four‐probe techniques, are used. From the measurements, the bandgap energy of the annealed film is found to be 1.64 eV at 450 °C which is in the optimal range as an absorber layer for solar cell devices. Similarly, by employing the four‐probe technique, I–V characteristics for the as‐deposited thin films, the material shows non‐ohmic behavior whereas the annealed film demonstrates partially ohmic with a resistance of 670 ohms.Keywords
This publication has 31 references indexed in Scilit:
- Facile designing and assessment of photovoltaic performance of hydrothermally grown kesterite Cu2ZnSnS4 thin films: Influence of deposition timeSolar Energy, 2020
- Void and secondary phase formation mechanisms of CZTSSe using Sn/Cu/Zn/Mo stacked elemental precursorsNano Energy, 2019
- Facile hydrothermal assisted synthesis of time dependent Cu2S thin films for efficient photoelectrochemical applicationJournal of Materials Science: Materials in Electronics, 2018
- A band-gap-graded CZTSSe solar cell with 12.3% efficiencyJournal of Materials Chemistry A, 2016
- Solar cell efficiency tables (Version 45)Progress in Photovoltaics: Research and Applications, 2014
- CZTS-based materials and interfaces and their effects on the performance of thin film solar cellsPhysica Status Solidi (RRL) – Rapid Research Letters, 2014
- Cu2ZnSnS4Cu2ZnSnS4 thin film solar cells prepared by non-vacuum processingSolar Energy Materials and Solar Cells, 2009
- Cu2ZnSnS4 thin film solar cells from electroplated precursors: Novel low-cost perspectiveThin Solid Films, 2009
- Band-gap grading in Cu(In,Ga)Se2 solar cellsJournal of Physics and Chemistry of Solids, 2005
- Device modeling and simulation of the performance of Cu(In1−x,Gax)Se2 solar cellsSolid-State Electronics, 2004