Solution-based CdS thin film transistors with low temperature-processed Al 2 O 3 -GPTMS-PMMA as hybrid dielectric gate
- 8 March 2021
- journal article
- research article
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 36 (4) , 045015
Abstract
Herein, we report the low-temperature fabrication process and the electrical response of n-type cadmium sulfide (CdS)-based thin-film transistors (TFTs) with an Al 2 O 3 -GPTMS-polymethylmethacrylate (PMMA) hybrid dielectric gate. The TFTs with bottom-gate structure were assembled on ITO (indium-tin-oxide)-coated glass substrates employing solution processes for the deposition of both the dielectric gate and semiconductor layers. The hybrid dielectric layers were deposited by the sol-gel process and subsequently annealed at 150 °C. The FTIR and XPS analysis of the hybrid films demonstrated a proper link between Al 2 O 3 and PMMA through the cross-linking agent 3-glycidoxy(propyltrimethoxysilane) silane (GPTMS). The surface characteristics were obtained by contact angle and atomic force microscope studies, the results show that the surface of hybrid films displays a hydrophobic behavior with a smooth surface. The CdS active layer was deposited on the hybrid dielectric gate at room temperature by a simple photochemical bath deposition using a 313 nm UV lamp. The CdS-TFTs showed outstanding electrical performance with a low threshold voltage of 1.3 V, I ON /I OFF of 10 4 , subthreshold swing of 440 mV dec −1 , and remarkable high mobility value of 64.4 cm 2 V −1 s −1 . Ultimately, the feature of these completely solution-based CdS TFTs is the maximum processing temperature of 150 °C, and the findings of this study are very promising for potential low-cost solution-processed TFTs.Keywords
This publication has 44 references indexed in Scilit:
- A facile low-cost preparation of high-k ZrO2 dielectric films for superior thin-film transistorsCeramics International, 2019
- The Performance of Zr-Doped Al-Zn-Sn-O Thin Film Transistor Prepared by Co-SputteringApplied Sciences, 2019
- Performance and Reliability Comparison of ZnO and IGZO Thin-Film Transistors and Inverters Fabricated at a Maximum Process Temperature of 115 °CIEEE Transactions on Electron Devices, 2019
- Polymer-Doped Ink System for Threshold Voltage Modulation in Printed Metal Oxide Thin Film TransistorsThe Journal of Physical Chemistry Letters, 2019
- High-performance amorphous indium gallium zinc oxide thin-film transistors with sol-gel processed gate dielectric and channel layer fabricated using microwave irradiationCurrent Applied Physics, 2018
- Printed Electronics Based on Inorganic Semiconductors: From Processes and Materials to DevicesAdvanced Materials, 2018
- Fabrication of Ultra-Thin Printed Organic TFT CMOS Logic Circuits Optimized for Low-Voltage Wearable Sensor ApplicationsScientific Reports, 2016
- Organic field-effect transistor-based gas sensorsChemical Society Reviews, 2015
- Effect of indium composition ratio on solution-processed nanocrystalline InGaZnO thin film transistorsApplied Physics Letters, 2009
- Effect of annealing temperature on the properties of IZO films and IZO based transparent TFTsThin Solid Films, 2007