Application of entropy in identification of breathing cracks in a beam structure: Simulations and experimental studies
Authors:
- 3 May 2017
- journal article
- research article
- Published by SAGE Publications in Structural Health Monitoring
- Vol. 17 (3) , 549-564
Abstract
A cantilever beam with a breathing crack is studied to detect the crack and evaluate the crack depth using entropy measures. During the vibration in engineering structures, fatigue cracks undergo the status from close-to-open (and open-to-close) repetitively leading to a crack breathing phenomenon. Entropy is a measure, which can quantify the complexity or irregularity in system dynamics, and hence employed to quantify the bi-linearity/irregularity of the vibration response, which is induced by the breathing phenomenon of a crack. A mathematical model of harmonically excited unit length steel cantilever beam with a breathing crack located near the fixed end is established, and an iterative numerical method is applied to generate accurate time domain vibration responses. The steady-state time domain vibration signals are pre-processed with wavelet transformation, and the bi-linearity/irregularity of the vibration signals due to breathing effect is then successfully quantified using both sample entropy and quantized approximation of sample entropy to detect and estimate the crack depth. It is observed that the method is capable of identifying crack depths even at very early stages of 3% of the beam thickness with significant increment in the entropy values (more than 200%) compared to the healthy beam. In addition, experimental studies are conducted, and the simulation results are in good agreement with the experimental results. The proposed technique can also be applied to damage identification in other types of structures, such as plates and shells.Keywords
Funding Information
- Natural Sciences and Engineering Research Council of Canada
- University of Manitoba
This publication has 45 references indexed in Scilit:
- Bearing Fault Diagnosis Based on Multiscale Permutation Entropy and Support Vector MachineEntropy, 2012
- Experimental studies on damage detection of beam structures with wavelet transformInternational Journal of Engineering Science, 2011
- Crack detection in beams using experimental modal data and finite element modelInternational Journal of Mechanical Sciences, 2005
- Crack detection in beams using changes in frequencies and amplitudes of frequency response functionsJournal of Sound and Vibration, 2003
- Vibration of a Cracked Cantilever BeamJournal of Vibration and Acoustics, 1998
- MODAL ANALYSIS OF A CRACKED BEAMJournal of Sound and Vibration, 1997
- The Modelling of the Opening and Closure of a CrackJournal of Vibration and Acoustics, 1995
- Modelling and vibration analysis of a cantilever composite beam with a transverse open crackJournal of Sound and Vibration, 1995
- Identification of fatigue cracks from vibration testingJournal of Sound and Vibration, 1990
- Identification of crack location and magnitude in a cantilever beam from the vibration modesJournal of Sound and Vibration, 1990