An experimental study of reverse compound lean in a linear turbine cascade
Authors:
- 1 January 2005
- journal article
- other
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
- Vol. 219 (6) , 443-449
Abstract
This paper describes a detailed experimental investigation into the effects of reverse compound lean (RCL) in a highly loaded axial turbine cascade. The geometry was designed using fully three-dimensional viscous CFD calculations to achieve a reduction in secondary flow. Traverses were made upstream and downstream with three-hole and five-hole probes to quantify the effects on the flow and losses produced by the leaned blade compared with a prismatic blade. These measurements were supplemented with blade static pressure measurements and surface flow visualization. It was found that the RCL blade produced higher overturning at the end-wall accompanied by higher secondary loss but this was constrained closer to the end-wall. Near mid-span, the turning was reduced slightly but the overall turning for the row was unaltered. The mid-span showed much less loss, so that overall the loss was reduced by 11 per cent. An understanding of these effects may be gained by consideration of the three-dimensional effects produced by the RCL.Keywords
This publication has 4 references indexed in Scilit:
- The benefits of turbine endwall profiling in a cascadeProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2005
- The exploitation of three-dimensional flow in turbomachinery designProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 1998
- Calculations of the Secondary Flow in a Turbine Cascade1995
- The Influence of Blade Lean on Turbine Losses1990