Simulation Analysis of the Breaking Process of 550kV 80kA SF6 Circuit Breaker
- 25 March 2022
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Abstract
With the continuous development of the power grid, the short-circuit current of the line is getting higher and higher. In some areas, the rated short-circuit current has been increased from 63kA to 80kA, which puts forward new requirements for the improvement of the breaking performance of the existing 550kV circuit breakers. In order to develop the arc extinguishing chamber of a 550kV 80kA circuit breaker and reproduce the process of breaking the arc fault (arc-ignition-arc extinguishing) of the circuit breaker, this paper is based on the existing mathematical model of the arc breaking process of the circuit breaker. The close fault breaking process of a 550kV 80kA circuit breaker was simulated and calculated, and parameters such as the pressure, temperature and axial velocity of the arc extinguishing chamber during the breaking process were obtained, and the boundary conditions were combined for analysis. Provide a reference for the subsequent structural optimization used in the design of the circuit breaker.Keywords
Funding Information
- State Grid Corporation of China (SGSDDK00SPJS 1900 145)
This publication has 10 references indexed in Scilit:
- Pressure and Arc Voltage Measurement in a 252 kV SF6Puffer Circuit BreakerPlasma Science and Technology, 2016
- Arc Gas-Flow Simulation Algorithm Considering the Effects of Nozzle Ablation in a Self-Blast GCBIEEE Transactions on Power Delivery, 2015
- A comparative study of arc behaviour in an auto-expansion circuit breaker with different arc durationsJournal of Physics D: Applied Physics, 2014
- The modelling of an SF6arc in a supersonic nozzle: I. Cold flow features and dc arc characteristicsJournal of Physics D: Applied Physics, 2014
- Current zero behaviour of an SF6nozzle arc under shock conditionsJournal of Physics D: Applied Physics, 2013
- Hybrid model of electric arcs in high voltage circuit breakersElectric Power Systems Research, 2012
- Arc Movement Inside an AC/DC Circuit Breaker Working With a Novel Method of Arc Guiding: Part I—Experiments, Examination, and AnalysisIEEE Transactions on Plasma Science, 2012
- Flow Behavior in High-Voltage Circuit BreakerIEEE Transactions on Plasma Science, 2011
- Computational Investigation of Arcing Phenomena in 245 kV Hybrid Circuit BreakerJapanese Journal of Applied Physics, 2007
- The development of PC based CAD tools for auto-expansion circuit breaker designIEEE Transactions on Power Delivery, 1999