Assessing the Strength Characteristics and Environmental Impact of Fly-Ash Geopolymer Mortar for Sustainable Green Patch Repair: A Pathway towards SDGs Achievement
Authors:
Open Access
- 22 November 2024
- conference paper
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 594, 06001
Abstract
The primary factor influencing the service life of building structures is concrete deterioration caused by steel bar corrosion, which holds significant impact. Implementing maintenance techniques is crucial for mitigating both environmental and economic ramifications, thereby aligning with the Sustainable Development Goals (SDGs) agenda. Patch repair emerges as a prevalent method for addressing degradation stemming from corrosion-induced cracking. This study introduces experimental investigations into the utilization of fly-ash geopolymer mortar as an environmentally sustainable option for green patch repair. Material properties, encompassing grain size distribution, specific gravity, mud content, water absorption, water content, and X-ray fluorescence, were thoroughly examined. The fresh properties of the mortar were evaluated through flow table testing, while compressive strength testing was conducted on the hardened mortar. The findings indicate that all mix proportions considered in this experimental inquiry are viable for use as patch repair materials for substrate concrete, achieving a maximum strength of 30 MPa. Notably, a minimum aggregate-to-binder ratio of 30% is deemed sufficient for ensuring adequate strength of the patch material. However, in cases where the substrate comprises high-strength concrete with 60 MPa, mix proportions with aggregate-to-binder ratios of 35% and 40% are recommended.Keywords
This publication has 25 references indexed in Scilit:
- Mixed artificial intelligence models for compressive strength prediction and analysis of fly ash concreteAdvances in Engineering Software, 2023
- Axial compressive behavior and model assessment of FRP-confined seawater sea-sand concrete-filled stainless steel tubular stub columnsComposite Structures, 2023
- Flexural behavior evaluation of repaired high strength geopolymer concreteComposite Structures, 2022
- Steel corrosion and corrosion-induced cracking in reinforced concrete with carbonated recycled aggregateCement and Concrete Composites, 2022
- Coating performance, durability and anti-corrosion mechanism of organic modified geopolymer composite for marine concrete protectionCement and Concrete Composites, 2022
- Passivity of embedded reinforcement in carbonated low-calcium fly ash-based geopolymer concreteCement and Concrete Composites, 2018
- Effect of ultrafine fly ash on mechanical properties of high volume fly ash mortarConstruction and Building Materials, 2014
- Mix proportions and mechanical properties of concrete containing very high-volume of Class F fly ashConstruction and Building Materials, 2013
- Corrosion of Steel in Concrete2013
- A model for prediction of time from corrosion initiation to corrosion crackingCement and Concrete Composites, 2007