A Correlation Study of Computational Techniques to Model Engine Air Induction System Response Including BEM, FEM and 1D Methods
Authors:
- 5 May 2003
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Induction noise, which radiates from the open end of the engine air induction system, can be of significant importance in reducing vehicle interior noise and tuning the interior sound to meet customer expectations. This makes understanding the source noise critical to the development of the air induction system and the vehicle interior sound quality. Given the ever-decreasing development times, it is highly desirable to use computer-aided engineering (CAE) tools to accelerate this process. Many tools are available to simulate induction noise or, more generally, duct acoustics. The tools vary in degrees of complexity and inherent assumptions. Three-dimensional tools will account for the most general of geometries. However, it is also possible to model the duct acoustics with quasi-three-dimensional or one-dimensional tools, which may be faster as well. The subject of this study is to use a simplified induction system as an ideal test case to compare these tools that simulate the system response and to correlate to experiment.Keywords
This publication has 17 references indexed in Scilit:
- Circular asymmetric Helmholtz resonatorsThe Journal of the Acoustical Society of America, 2000
- Case study: Acoustic attenuation performance of circular expansion chambers with extended end-inlet and side-outletNoise Control Engineering Journal, 2000
- Various approaches to estimating natural frequencies of automobile cab cavities from a boundary-element modelThe Journal of the Acoustical Society of America, 1997
- Analysis of three dimensional muffler with boundary element methodApplied Acoustics, 1993
- A cost comparison of boundary element and finite element methods for problems of time-harmonic acousticsComputer Methods in Applied Mechanics and Engineering, 1992
- Finite element analysis of natural frequencies of acoustic enclosures with periodic propertiesJournal of Sound and Vibration, 1991
- Prediction of Acoustical Behavior in Cavities Using an Indirect Boundary Element MethodJournal of Vibration and Acoustics, 1987
- Application of the Boundary Element Method to Acoustic Cavity Response and Muffler AnalysisJournal of Vibration and Acoustics, 1987
- A Method for the Analytical Prediction of Insertion Loss of a Two-Dimensional Muffler Model Based on the Transfer Matrix Derived from the Boundary Element MethodJournal of Vibration and Acoustics, 1985
- Finite element approach to acoustic transmission-radiation systems and application to horn and silencer designJournal of Sound and Vibration, 1980