A Numerical Investigation of the Thermal Behavior of Different Phase Change Materials in Thermal Energy Storage Systems
Author:
Preprint
- 16 October 2023
- preprint
- Published by Springer Nature in Research Square
Abstract
Phase change materials (PCM) are widely used in thermal energy storage systems due to their high heat storage properties. However, due to the low thermal conductivity of PCMs, different surface areas are employed in order to increase the amount of energy. One of these methods is to use fins with high thermal conductivity. This study numerically investigated the thermal behavior of different PCMs (paraffin, paraffin wax, polyethylene glycol 6000) during the melting process in a thermal energy storage system with 15 fins. A FOX 50 heat flow meter was used for thermal conductivity measurements of these PCMs, and TA DSC Q200 (Differential Scanning Calorimetry) devices were used for specific heat measurements. The thermal property data of these measured PCMs were used in a time-dependent analysis. With the PCM data obtained, time-dependent thermal analyses were carried out using the Ansys-Fluent program based on the Computational Fluid Dynamics (CFD) method. The effect of these different PCMs on the melting processes was investigated by using water at 75oC in a 15-fin thermal storage system by observing their thermal behavior in the thermal energy storage system. In addition, cost analyses were conducted by determining the required amount of PCMs for the thermal storage system.Keywords
All Related Versions
This publication has 19 references indexed in Scilit:
- Transient multi-day simulations of thermal storage and heat extraction for a finned solar thermal storage deviceSolar Energy, 2017
- Establishment and experimental verification of TRNSYS model for PCM floor coupled with solar water heating systemEnergy and Buildings, 2017
- An experimental investigation of shell and tube latent heat storage for solar dryer using paraffin wax as heat storage materialEngineering Science and Technology, an International Journal, 2016
- PCM thermal storage system for ‘free’ heating and cooling of buildingsEnergy and Buildings, 2015
- Numerical study of PCM solidification in a finned tube thermal storage including natural convectionApplied Thermal Engineering, 2015
- Numerical Study on the Thermal Performance of a Shell and Tube Phase Change Heat Storage Unit during Melting ProcessAdvances in Mechanical Engineering, 2014
- Review of thermal energy storage technologies based on PCM application in buildingsEnergy and Buildings, 2013
- Enhance heat transfer for PCM melting in triplex tube with internal–external finsEnergy Conversion and Management, 2013
- A combined experimental and computational study on the melting behavior of a medium temperature phase change storage material inside shell and tube heat exchangerInternational Communications in Heat and Mass Transfer, 2012
- Effects of the number and distribution of fins on the storage characteristics of a cylindrical latent heat energy storage system: a numerical studyHeat and Mass Transfer, 2012