Impact Response of Composite Sandwich Cylindrical Shells
Open Access
- 19 November 2021
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 11 (22) , 10958
Abstract
Nowadays, due to the complexity and design of many advanced structures, cylindrical shells are starting to have numerous applications. Therefore, the main goal of this work is to study the effect of thickness and the benefits of a carbon composite sandwich cylindrical shell incorporating a cork core, compared to a conventional carbon composite cylindrical shell, in terms of the static and impact performances. For this purpose, static and impact tests were carried out with the samples freely supported on curved edges, while straight edges were bi-supported. A significant effect of the thickness on static properties and impact performance was observed. Compared to thinner shells, the failure load on the static tests increased by 237.9% and stiffness by 217.2% for thicker shells, while the restored energy obtained from the impact tests abruptly increased due to the collapse that occurred for the thinner ones. Regarding the sandwich shells, the incorporation of a cork core proved to be beneficial because it promoted an increase in the restored energy of around 44.8% relative to the conventional composite shell. Finally, when a carbon skin is replaced by a Kevlar one (hybridization effect), an improvement in the restored energy of about 20.8% was found. Therefore, it is possible to conclude that numerous industrial applications can benefit from cylindrical sandwiches incorporating cork, and their hybridization with Kevlar fibres should be especially considered when they are subject to impact loads. This optimized lay-up is suggested because Kevlar fibres fail through a series of small fibril failures, while carbon fibres exhibit a brittle collapse.Keywords
This publication has 66 references indexed in Scilit:
- Optimal design for the flexural behaviour of glass and carbon fibre reinforced polymer hybrid compositesMaterials & Design (1980-2015), 2012
- Influence of the specimen thickness on low velocity impact behavior of compositesJournal of Polymer Engineering, 2012
- Effect of back pressure on impact and compression-after-impact characteristics of compositesComposite Structures, 2010
- An experimental investigation of the impact response of composite laminatesComposite Structures, 2009
- Punch shear based penetration model of ballistic impact of thick-section compositesComposite Structures, 2008
- Effect of thickness on buckling of perfect cross-ply rings under external pressureComposite Structures, 2007
- Damage initiation and propagation in composite shells subjected to impactComposite Structures, 2007
- Penetration and perforation of FRP laminates struck transversely by conical-nosed projectilesComposite Structures, 2006
- Studies on the low-velocity impact response of woven hybrid compositesComposite Structures, 2005
- Impact response and damage in laminated composite cylindrical shellsComposite Structures, 2003