Failure Analysis of SS 304 Weldments by Metallurgically Enhanced Stress Corrosion Cracking in Laboratory Environments

Authors:

Abstract
The mechanisms of metallurgically enhanced crack initiation and propagation in austenitic stainless steel weldments were investigated using electrochemical and physical methods. The test media was boiling Magnesium Chloride solutions, MgCl2, at 32% and 37% weight respectively. A batch of U-Bend specimens was tested at each salt concentration. Optical and electron microscopy was used to examine cracked weldments. Traditionally, welding rods used for joining austenitic stainless steels contain a percentage of retained δ-ferrite. This small content of the electrically active phase remains trapped between interdendritic arms of the austenitic matrix after solidification. Such a situation leads to the formation of numerous microgalvanic cell systems in the electrolytic test media. It was found from optical and electron microscopy results that δ-ferrite rich interdendritic spaces suffered excessive preferential dissolution in favor of austenitic dendrites. It was also found that initiated cracks propagated along interdendritic spaces suitably aligned with respect to the stress field. Electrochemical test results indicate that weldments tend to corrode along the borderline between activity and passivity. The results further suggest that weldments exhibited repetitive cycles of passive film formation and dissolution.