Does the Layer Configuration of Loofah (Luffa cylindrica) Affect the Mechanical Properties of Polymeric Composites?
Authors:
- Edgley Alves de Oliveira PaulaEPEdgley Alves de Oliveira Paula
- Rafael Rodolfo de MeloRafael Rodolfo de Melo
- Felipe Bento de AlbuquerqueFAFelipe Bento de Albuquerque
- Fernanda Monique da SilvaFSFernanda Monique da Silva
- Mário Vanoli ScatolinoMSMário Vanoli Scatolino
- Alexandre Santos PimentaAlexandre Santos Pimenta
- Edjane Alves de Oliveira PaulaEPEdjane Alves de Oliveira Paula
- Talita Dantas PedrosaTPTalita Dantas Pedrosa
- Ricardo Alan da Silva VieiraRVRicardo Alan da Silva Vieira
- Francisco Rodolfo JuniorFJFrancisco Rodolfo Junior
Open Access
- 14 June 2024
- journal article
- research article
- Published by MDPI AG in Journal of Composites Science
- Vol. 8 (6) , 223
Abstract
The arrangement of layers of natural long fibers that compose a polymeric composite can result in a final material with greater mechanical strength, in addition to replacing synthetic glass and carbon fibers. This study proposed different configurations of layers of loofah fibers (Luffa cylindrica) to produce reinforced polymeric–polyester composites, determining their potential mechanical properties such as flexural strength and Rockwell hardness. The layers were arranged by varying parallel and perpendicularly the direction of the loofah fibers pieces. The reinforcement decreased the density of all composites, with the lowest value, 1.03 g cm−3, indicated by the configuration 90°/0°/90°. The composites in the configuration 0°/90°/0° presented the highest value among the reinforced compositions (10.8 MPa), in addition to the highest rigidity value during bending tests (774.8 MPa). In the Rockwell hardness tests, the treatment reinforced with fibers in the configuration 90°/90°/90° had the highest value among all experimental treatments with a value of 86.9 HHR. The configuration angle of the loofah layers has a significant impact on the mechanical performance of the composites and should be taken into account in their confection. Furthermore, composites reinforced with loofah fibers in different configurations have physical–mechanical properties that qualify them for non-structural applications in indoor environments.Keywords
Funding Information
- Coordinate Improvement of Higher Education Personnel (CAPES)
- Brazilian National Council for Scientific and Technological Development (CNPq)
This publication has 42 references indexed in Scilit:
- Statistical analysis of the substitution of inorganic fibers and fillers with vegetable fibers and fillers in polystyrene compositesJournal of Applied Polymer Science, 2024
- Plant fiber-reinforced polymer composites: a review on modification, fabrication, properties, and applicationsPolymer Bulletin, 2023
- Production and properties of the fibrillated plastic composite from recycled polystyrene and Luffa cylindricaPolymer Bulletin, 2022
- Characterization of Cocos nucifera L. peduncle fiber reinforced polymer composites for lightweight sustainable applicationsJournal of Applied Polymer Science, 2022
- Sustainable valorization of recycled low-density polyethylene and cocoa biomass for composite productionEnvironmental Science and Pollution Research, 2021
- Comprehensive review on plant fiber-reinforced polymeric biocompositesJournal of Materials Science, 2021
- A review on Luffa fibres and their polymer compositesJournal of Materials Science, 2020
- A review of natural fiber composites: properties, modification and processing techniques, characterization, applicationsJournal of Materials Science, 2019
- Experimental and Simulation Studies on Waste Vegetable Peels as Bio-composite Fillers for Light Duty ApplicationsArabian Journal for Science and Engineering, 2019
- Effect of Luffa cylindrica fiber and particulate on the mechanical properties of epoxyThe International Journal of Advanced Manufacturing Technology, 2019