The influence of process parameters on the growth morphology of large-grain Pt-doped YBCO fabricated by seeded peritectic solidification
Authors:
- 1 June 1997
- journal article
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 10 (6) , 435-443
Abstract
We report an investigation of the processing of large-grain Y - Ba - Cu - O (YBCO) containing 0.1, 0.2 and 0.5 wt% platinum (Pt) doping using seeded peritectic solidification in a vertical tube furnace. In this study differential thermal analysis of the Pt-doped YBCO powders and careful temperature calibration of the furnace were performed in order to determine optimum values of the thermal process parameters for each composition. The seeded melt process was observed to be extremely sensitive to the melting temperature, peritectic solidification temperature and cooling rate during grain growth, and failure to optimize these parameters can result in various undesirable effects such as incomplete melting, the nucleation of multiple grains and the formation of local regions of impurity concentration within the sample. Scanning electron microscopy and vibrating sample magnetometry were employed to investigate the microstructure and current-carrying capabilities of the samples. From these, 0.1 wt% Pt doping was determined to be sufficient for the fabrication of melt-processed samples containing fine, sub-micron-sized Y-211 particles which exhibited high critical current densities. No improvement in sample properties was observed for higher levels of Pt doping.Keywords
This publication has 33 references indexed in Scilit:
- Critical currents up to 71 000 A cm−2 at 77 K in melt textured YBCO doped with BaSnO3Cryogenics, 1994
- Applications of high temperature superconductors on levitation bearings and other levitation devicesApplied Superconductivity, 1993
- Novel application of high Tc bulk superconductorsApplied Superconductivity, 1993
- The effects of second phase additions (SiC, BaZrO3, BaSnO3) on the microstructure and superconducting properties of zone melt textured pBa2Cu3O7-xApplied Superconductivity, 1993
- An Improvement of the Static and Dynamic Characteristics of Superconducting Magnetic Bearings Using MPMG-YBaCuO1993
- Characterization of Superconducting Magnetic Bearings (Runnout Performance at High Speed Rotation)1993
- Effect of Y2BaCuOx precipitates on flux pinning in melt-processed YBa2Cu3OxPhysica C: Superconductivity and its Applications, 1992
- The relationship between magnetisation and hysteresis of critical current in sintered YBCOPhysica C: Superconductivity and its Applications, 1992
- High current density in bulk YBa2Cu3Ox superconductorApplied Physics Letters, 1989
- High critical currents in Y-Ba-Cu-O superconductorsApplied Physics Letters, 1988