Nanoelectromechanical torsion switch of low operation voltage for nonvolatile memory application
Authors:
- 10 May 2010
- journal article
- conference paper
- Published by AIP Publishing in Applied Physics Letters
- Vol. 96 (19) , 193113
Abstract
Nanoelectromechanical torsion switches are fabricated by using focused ion beam milling on silicon-on-insulator substrate. The device layer thickness of the substrate is 220 nm. A long and wide suspended silicon cantilever is mechanically connected to peripheral silicon device layer via a silicon torsion spring with the length of and width of 530 nm. After hydrofluoric-acid vapor releasing, the silicon cantilever shows downward deflection. The pull-in voltage is about 5.5 V and the ratio of current measured at the ON/OFF states is over 1000. Moreover, the simulated data of pull-in voltage of torsion switch is in agreement with the experimental result, which will contribute to design of an optimal nanoelectromechanical torsion switch with a driven voltage as low as 1.2 V. According to the preliminary results, this torsion switch with low driven voltage has a great potential for high density non-volatile memory application.
Keywords
This publication has 10 references indexed in Scilit:
- Bilayer graphene nanoribbon nanoelectromechanical system device: A computational studyApplied Physics Letters, 2009
- NEMS switch with 30nm-thick beam and 20nm-thick air-gap for high density non-volatile memory applicationsSolid-State Electronics, 2008
- Nanoelectromechanical switch with low voltage driveApplied Physics Letters, 2008
- Nanoscale memory cell based on a nanoelectromechanical switched capacitorNature Nanotechnology, 2007
- Electromechanical Carbon Nanotube Switches for High-Frequency ApplicationsNano Letters, 2006
- Nanoelectromechanical switches with vertically aligned carbon nanotubesApplied Physics Letters, 2005
- Limits to binary logic switch scaling-a gedanken modelProceedings of the IEEE, 2003
- Device scaling limits of Si MOSFETs and their application dependenciesProceedings of the IEEE, 2001
- Carbon Nanotube-Based Nonvolatile Random Access Memory for Molecular ComputingScience, 2000
- Pull-in study of an electrostatic torsion microactuatorJournal of Microelectromechanical Systems, 1998