Diopside modified porous polyglycolide scaffolds with improved properties
- 12 June 2015
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5 (68) , 54822-54829
Abstract
Polyglycolide (PGA) is considered an attractive candidate for bone regeneration because of its good biodegradability and biocompatibility. However, its insufficient mechanical strength and inadequate bioactivity limit its applications. In this study, diopside (DIOP) was incorporated into PGA scaffolds to enhance the mechanical and biological properties. The porous scaffolds were fabricated via selective laser sintering (SLS). The effect of the DIOP content on the microstructure, mechanical properties, bioactivity as well as cytocompatibility of the porous scaffolds was studied. The results showed that DIOP particles were homogenously distributed within the PGA matrix, which contained up to 10 wt%. This led to an improvement of 171.2% in compressive strength and 46.2% in compressive modulus. In vitro studies demonstrated that the highest apatite forming ability was obtained on the scaffold surfaces with the highest amount of DIOP after soaking in simulated body fluid (SBF), suggesting that the bioactivity of the scaffolds increased with increasing DIOP. In addition, a cytocompatibility study showed that the scaffolds exhibited a higher degree of cell attachment, growth and differentiation than the pure PGA scaffolds. These indicated that the PGA scaffolds modified with DIOP possessed suitable properties which could be used for bone tissue regeneration.Keywords
This publication has 57 references indexed in Scilit:
- Correlation between properties and microstructure of laser sintered porousβ-tricalcium phosphate bone scaffoldsScience and Technology of Advanced Materials, 2013
- A proposed role for glutamine in cancer cell growth through acid resistanceCell Research, 2013
- Preparation and characterization of polycaprolactone/forsterite nanocomposite porous scaffolds designed for bone tissue regenerationComposites Science and Technology, 2012
- Bioactive glass microspheres as reinforcement for improving the mechanical properties and biological performance of poly(ε‐caprolactone) polymer for bone tissue regenerationJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2012
- Investigating the effect of PGA on physical and mechanical properties of electrospun PCL/PGA blend nanofibersJournal of Applied Polymer Science, 2011
- Fabrication, microstructure, and BMP-2 delivery of novel biodegradable and biocompatible silicate–collagen hybrid fibril sheetsJournal of Materials Chemistry, 2011
- Bioactive Glass and Glass-Ceramic Scaffolds for Bone Tissue EngineeringMaterials, 2010
- Fabrication of Bioactive Scaffold of Poly(ɛ‐Caprolactone) and Nanofiber Wollastonite CompositeJournal of the American Ceramic Society, 2009
- Bioactive ceramic-based materials with designed reactivity for bone tissue regenerationJournal of The Royal Society Interface, 2009
- Effect of hydrogel porosity on marrow stromal cell phenotypic expressionBiomaterials, 2008