The mechanical properties of freestanding electroplated Cu thin films
Authors:
- 1 June 2006
- journal article
- Published by Springer Nature in Journal of Materials Research
- Vol. 21 (6) , 1607-1618
Abstract
The plane-strain bulge test is used to investigate the mechanical behavior of freestanding electroplated Cu thin films as a function of film thickness and microstructure. The stiffness of the films increases slightly with decreasing film thickness because of changes in the crystallographic texture and the elastic anisotropy of Cu. Experimental stiffness values agree well with values derived from single-crystal elastic constants and the appropriate orientation distribution functions. No modulus deficit is observed. The yield stress of the films varies with film thickness and heat treatment as a result of changes in the grain size of the films. The yield stress follows typical Hall-Petch behavior if twins are counted as distinct grains, indicating that twin boundaries are effective barriers to dislocation motion. The Hall-Petch coefficient is in good agreement with values reported for bulk Cu. Film thickness and crystallographic texture have a negligible effect on the yield stress of the films.Keywords
This publication has 45 references indexed in Scilit:
- Morphology, microstructure, and mechanical properties of a copper electrodepositMicroelectronic Engineering, 2004
- Ultrahigh Strength and High Electrical Conductivity in CopperScience, 2004
- The yield strength of thin copper films on KaptonJournal of Applied Physics, 2004
- The Effect of Grain Boundary Characteristics on Microstructure and Stress Void Evolution in Electroplated and Sputtered Cu FilmsMaterials Science Forum, 2003
- Tensile properties of free-standing aluminum thin filmsScripta Materialia, 2001
- Discrete dislocation and continuum descriptions of plastic flowMaterials Science and Engineering: A, 2001
- Crack-like grain-boundary diffusion wedges in thin metal filmsActa Materialia, 1999
- Quantitative analysis of strengthening mechanisms in thin Cu films: Effects of film thickness, grain size, and passivationJournal of Materials Research, 1998
- Tension-tension fatigue of copper thin films*1International Journal of Fatigue, 1998
- Stress development and relaxation in copper films during thermal cyclingJournal of Materials Research, 1993