The Control of Structure-Borne Noise from a Viaduct Using Floating Honeycomb Panel
Authors:
- 1 January 2006
- journal article
- Published by Japan Society of Mechanical Engineers in JSME International Journal Series C
- Vol. 49 (2) , 494-504
Abstract
This paper identifies the method to control the vibration responses of a concrete viaduct models under impulsive force excitation. The frequencies and mode shapes of resonances of the bending vibration across the section can control the magnitude of the structure-borne noise radiation. A plastic hammer is used to excite the cement viaduct model at the centre and at the supporting edge position of the cross-section separately. The results of analysis using a Finite Element Method are confirmed by the experimental findings of the cross-sectional modes. The findings showed that the local modes are of two types: (1) Centre mode - the centre of top panel can move but the edge is fixed. (2) Edge (web) mode - the centre of panel is fixed but the edge (supported by web) can move. It is found that by supporting the machines on the edge, the center mode will not be excited but the combined mode of edge and center mode can give rise to significant noise radiation. A honeycomb panel with high resonance frequency is used to reduce the vibration transmission from this combined mode. The design can be used as an alternative to floating slab for reducing noise.Department of Civil and Environmental EngineerinKeywords
This publication has 8 references indexed in Scilit:
- Low frequency sound insulation using stiffness control with honeycomb panelsApplied Acoustics, 2008
- Noise Reduction Techniques for Close-fitting Enclosures at Structural/Acoustic ResonanceJSME International Journal Series C, 2003
- STRUCTURE-BORNE NOISE AND VIBRATION OF CONCRETE BOX STRUCTURE AND RAIL VIADUCTJournal of Sound and Vibration, 2002
- VIADUCT DESIGN FOR MINIMIZATION OF DIRECT AND STRUCTURE-RADIATED TRAIN NOISEJournal of Sound and Vibration, 2000
- STRUCTURE-BORNE SOUND AND VIBRATION FROM RAIL TRAFFICJournal of Sound and Vibration, 1996
- NOISE CONTROL OF HIGH SPEED SHINKANSENJournal of Sound and Vibration, 1996
- A CALCULATION MODEL FOR THE NOISE FROM STEEL RAILWAY BRIDGESJournal of Sound and Vibration, 1996
- Practical calculation of floor impact sound by impedance methodApplied Acoustics, 1989